A Guide to Choosing Bar Equipment

Any restaurant with a dedicated bar will need to invest in additional equipment specifically designed for the bar area. Many of these units tend to take up less space and are specialized for bartending purposes.

Back Bar Coolers and Underbar Refrigeration Units

These units are specially designed to fit underneath a bar for storing beer, liquors, juices, and sodas. Here are a few units to keep in mind for your bar refrigeration:



Underbar Refrigeration Unit

Undercounter refrigeration is key to utilizing space in a bar setting, and these units are available in solid or glass door options. Opt for triple-paned glass or thermal doors to maximize the unit’s efficiency while reducing the risk of cracks or shatters due to an accidental bump during busy hours. Keep items neatly organized and bottle labels facing forward on beer so that customers can fully view the selection without assistance before ordering.

Draft Beer Cooler (and Dispensing Tower Heads)

Direct draw draft systems are one of the most common forms of dispensing systems for restaurants. They keep all components of the equipment in one place as opposed to storing kegs in a separate cooler. Here, your keg is kept a few feet from the faucet - usually in a refrigerated unit just underneath - and CO2 is injected in order to push the beer up and through the tap line. In these systems, you only have about 5 feet of tubing to work with, making it efficient and easy to maintain. These systems work for a multitude of situations but are ideal for bars that would like to store their selection of beer underneath the counter or for portable bars, as kegs don’t need to be in a specialized cooler room.

Don’t forget your tower heads for dispensing beer, which are available in several options for dispensing different numbers of beer.

Wine Cooler

Wine merchandisers are specialty types of glass door refrigeration for bars that are intended to display and store wines only. Shelving can hold wine bottles horizontally (best for out-of-site or underbar units) or at an angle where customers can read labels. Just be sure that all labels are facing outwards.These units are intended to be set at special temperatures designed specifically for wine storage that may not fall within normal refrigeration ranges of typical refrigerators. Most have drawers that pull out with circular indentations to keep the bottles stable.

Glass Chiller

Frosty mugs of beer are best served in chilled glasses, and there are many models of plate and glass chillers that can be easily stored underneath the bar for easy access and perfect glass-chilling duties.


There are a few types of units that are useful for the bar area in particular, and depending on your space constraints, health code restrictions, and bar needs, you may opt for one or more of these types for your establishment:

Sink Type


Handwashing Sink

These are essential for health codes and can be installed in an out-of-the way area of the back of the bar.

Underbar Bar Sink

These are useful for washing, sanitizing, and rinsing glassware in the bar area. These are especially helpful for cleaning glassware, which is essential to a successful bar. Some sink units are available in multi-compartment options to meet health codes requiring separate compartments for each part of the dishwashing process.

Upright Glass Washer

Also known as bar glass washers, these are available in two main options: manual washers with suction cup bottoms or electric upright glass washers powered by electric motors. Both options can speed up tedious washing work for the specific needs of glass cleaning in a bar area.  

It’s important to note that the addition of a booster heater can work wonders for removing those unwanted spots and splotches that are characteristic of chemical dishwashers leaving behind residue. Wine connoisseurs tend to opt for hot water sanitizing because of its removal of tastes, odors, and residues, which makes for a better wine-tasting experience. Because of the excess steam and the need for venting, the booster heater is best suited for kitchen dishwashing.

Speed Rails

Speed rails are essential for storing bottles of liquor and are available in a variety of sizes, shapes, and lengths as well as single- or double-tier models. Deciding on these details boils down to an analysis of your bar design and setup as well as an understanding of how many bottles of liquor you’ll need to store.

Bar Blender

Pina Coladas, Daiquiris, Margaritas...these blended cocktails are all essential to a liquor lineup for any commercial bar. Here are a few details to keep in mind when choosing a bar blender:

  • Size/Capacity: Many frozen drinks are made on an individual basis or made in small batches, as you don’t want frozen cocktails to liquify before they’re served. But some establishments may see larger batch requests at once. Think: Mexican restaurant on a hot summer night. Margaritas are typically a customer favorite in these scenarios, and you’ll want a blender that is able to hold more than one serving, as blending each individual drink can get time consuming. Capacity refers to the volume of liquid that a blender cavity can hold at once. Opt for larger volumes if you plan to serve up large batches, but save yourself the space if you know you’ll only need a blender that holds one serving or two at a time. If your menu boasts a 20 oz margarita, then make sure to opt for at least one size larger blender (a 48 oz blender perhaps) so that you have the ability to blend two servings at once.

  • Materials: Blender cups usually come in glass, plastic, or stainless steel. It’s mostly based on preference, but keep in mind the design and aesthetics of your bar when choosing the material, as a stainless steel cup may work well with a modern restaurant, but a glass cup will look nice for finer establishments as well. Blender bases can be comprised of chrome, stainless steel, or plastic. Chrome is attractive but requires attention to detail, as they scuff and show smudges easily. Brushed stainless steel is easier to maintain but can rust over time. Plastic is the easiest to maintain but sacrifices the professional look that both chrome and stainless steel can have.

  • Power: The most important way to tell how much power a commercial bar blender has is by its wattage or horsepower (HP), although HP is more common and simpler to identify. For comparison, one unit of HP is equal to over 745 watts, according to U.S. units of measure. If you’re blending tougher or more solid ingredients, then be sure to opt for higher HP units to handle the job. Blenders have a wide range of possible HP specifications, from 3/8 to 3 ¾ HP.

Ice Machines

While some beverages can be served chilled, many will need to be served blended or on the rocks, and these require ready-at-hand ice without a separate trip to the back kitchen. Undercounter ice units are perfect for the bar area and can be selected in options with dispensers or with a storage bin.