A Guide to Choosing Commercial Shelving


There are three primary types of shelving units, but keep in mind that accessory shelving (like undercounter shelving storage areas for stainless steel tables, for instance) are also available as an accessory to the primary product.

Shelving Type


Best for:

Dunnage Racks

Low, load-bearing dunnage racks are designed to keep heavy items at least 12 inches off the floor.

  • Keeping bulk items off the ground

Shelving Unit

These independent units can be stored in the kitchen, front-of-house, or within a walk-in unit. These units are extremely versatile and can be combined or shelves can be added. Different manufacturers have different weight capacities. Capacities are tested on an “evenly distributed basis”. Casters can be added to make the unit mobile with the sacrifice of the limiting the entire unit’s capacity.

  • Wide variety of items

  • Front-of-House Display (racks of breads, for instance)

  • Permanent Storage Areas

  • Walk-In Storage

Wall Shelving

Attaches directly to the wall and is designed to utilize every vertical inch of space in your kitchen. These can fit above other units or tables and work well if you’re running low on floor space.

Make sure to secure the wall brackets into beams and not just sheet rock (which won’t hold the weight).

  • Storage over appliances

  • Storage over furniture

  • Extra/small item storage

Specialty Shelving

In addition to primary shelving types, there are some additional types of specialty shelving units that can support your kitchen equipment and items:

Shelving Type


Best for:

Wine Racks

Designed to hold wine bottles at optimal angles with circulation to allow for temperature consistency. These can be chosen in individual wine bottle configurations or full case configurations.

  • Wine bottles

  • Cases of wine

Pan Racks

Blending shelving and service carts, pan racks utilize narrow rails to hold trays of food which can then be wheeled around.

  • Bakeries

  • Pizzerias

Security Units

These shelving units can be locked/secured, helping to prevent theft.

  • Alcohol storage

  • Personal Items

High Density Shelving

These shelving units can be moved together via a track system to pack the most items in any given area.

  • Heavy storage areas

  • Many items in a little space

Shelving Options

Shelf Design

Your shelving units can come with two primary types of shelving: solid and vented. Depending on what products you plan to store and where you plan to keep your shelving unit, certain shelving types may be better suited for certain areas and applications in your kitchen:

Shelving Type



Best for:


  • Easy to clean/sanitize

  • Ideal for messy prep areas

  • Messes stay contained on one shelf

  • Wet spills can contaminate foods quicker (shelves won’t dry quickly)

  • Frost can build up in freezers

  • Less circulation

  • Wall Shelving

  • Dry Storage

  • Undercounter Shelving


  • Good circulation

  • Quicker drying

  • Easy lifting and sliding

  • Greater visibility

  • Messes can drip through shelves, contaminating all items underneath

  • Harder to clean

  • Packed Dry Goods

  • Drying Wet Dishes

  • Bulk Storage

  • Worktable Shelving

Material Composition

Similarly, shelving can come in a variety of materials that can determine its longevity based on its use and applications:

Shelf Material


Best for:

Chrome Wire

Designed to increase visibility in non-humid environments.

  • Dry Storage

  • Display

Epoxy Coated Wire

Designed with protection against corrosion. Look for units that have an epoxy coating over a zinc coating. This way, the inevitable scratching of the epoxy won’t lead to rusting.

  • Walk-in Units

  • Moist or Humid Areas

  • Warewashing Areas

Polypropylene / Polymer

Corrosion-resistant and durable, these shelves are dishwasher safe.

A new hybrid wire underneath epoxy has become very popular. Strength of metal with corrosion resistant polymer shelves that can be removed for cleaning. Shelves should be vented.

  • Near seawater or salt air

  • Walk in boxes

  • Drying rack

Stainless Steel

Durable and less susceptible to rusting than aluminum.

  • Undercounter shelving with heavy use


Lighter but more susceptible to oxidation over time.

  • Undercounter shelving with light use.

  • Dry storage area

Stationary vs Mobile

Your shelving unit can come as a stationary unit or as a mobile unit, and depending on the permanence of your shelving area, one may be better suited for your kitchen over the other:

  • Stationery: Should be used in areas of storage permanence where setup isn’t often rearranged.

  • Mobile: These units can be moved about your establishment, allowing for better transportation of stored items from back- to front-of-house and for better cleaning behind and under the shelving unit. Mobility severely limits load capacity. So if the shelves can handle 600 lbs. each, depending on the caster type, casters will limit the total load to around 500 lbs, decreasing your unit’s weight capacity exponentially with each additional shelf. Depending on how many shelves you chose to instal with your unit, this can restrict the types and weights of items you store severely. While there are high end casters that will hold 200-300lbs each, the average casters only hold around 125-150 lbs each for a total load capacity of 500-600 lbs (4 casters x lb capacity of each caster).


There are many accessory items available for your shelving unit that can improve the usability of your unit:

  • Casters: Easily turn your stationary unit into a mobile shelving rack.

  • Ledges: Keep items contained on the shelves with easy-to-install ledge guards.

  • Hooks: to keep shelving units together and can be used to eliminate some of the upright posts.

Further Reading…

Wall Space: People focus on floor space to utilize as storage areas, but many overlook the possibility of utilizing empty wall space as well. Hangers, hooks, and racks are all great tools for storing light items such as linens, mitts, and utensils up and out of the way on your walls. Magnetic strips can be used to affix knives and prep cutlery just above prep tables; Just be sure to always keep meat-cutting knives separate from produce cutlery. You can either use separate strips or color-coded handles on your knives to ensure easy identifiability.

Work Centers: Work centers are created with organization and storage in mind. WIth shelves below and above the work table, workers can take small amounts of surplus items that would be used for the day and store them within reach. This cuts down on labor costs over time, helping to keep your kitchen running smoothly. Make the most of your work center by adding hooks to keep utensils up and off the work surface!

Keep Items Off the Ground: The FDA Food Code stipulates that food items need to be at least six inches off the ground at all times. Dunnage Racks are the perfect solution for the heavier items such as bags of flour, as these racks are usually designed to stand at least a foot off the ground already. Also, ensure your work tables have a lower shelf for added storage areas!

Shelving for Walk-Ins: Your walk-in unit is built for cold storage, so make sure you’re getting the most out of your investment by also purchasing epoxy-coated or polymer shelving. Both of these materials are built to last through the cold and moisture with little to no corrosion. Take heed when moving shelving in your walk-in to not place them in front of vents, or you’ll risk  damaging the efficiency and creating warm spots.