A Guide to Choosing Display Refrigeration

Note! Most of the units below are available with remote compressors. These require installation by a refrigeration technician, and this adds a lot of cost. Units situated in warm areas will work more efficiently and not add to the already warm ambient temperature if the condenser and compressor are place in a well-ventilated room. If they are placed outdoors, you will need to note that in your order so that an outdoor hood and heater can be included.


Types


Type

Guidelines

Best for:

Open Top Merchandisers

These readily-accessible merchandisers are designed for impulse buys, but remember that all items must be pre-packaged! May be more enticing to customers but also uses more energy.

  • Grab-n-Go items in customer-accessible areas

  • Packaged Products

  • Bottled Beverages

Glass Door Reach-In Refrigerators and Freezers

Designed with refrigeration and display in mind, merchandising refrigerators have a glass front door to allow for display of items within the cavity. Look for self closing doors and double or even triple pane glass.

  • Grab-n-Go items in customer-accessible areas

  • Bottled Beverages

Glass Door Bar Refrigeration

This includes refrigeration units designed for underbar displays of beer and wine, making them optimal for increasing bar sales while improving back-bar aesthetics. Look for LED lighting and Stainless or rust-proof interiors.

  • Areas of the bar visible to customers

  • Wine

  • Beer

Display Cases

Refrigerated display cases are ideal for showcasing items that still require refrigeration, allowing customers full view of their selections for increased sales. See also the special “Merchandiser” section of our website.

  • Deli Meats

  • Pies

  • Cakes

  • Side Dishes like macaroni salad, coleslaw, and salads

  • Seafood


Breaking It Down

Open Top Merchandisers

Also known as ‘air curtain merchandisers’, these refrigerated units utilize an air curtain in order to maintain refrigeration within the cavity without the use of a door. Because of their accessibility, customers are more likely to snag a few items from this type of refrigeration unit. There are a few tips to keep in mind when selecting this type of display refrigeration:

  • Because of the nature of the design, most manufacturers recommend that you place this unit in an area of 55% relative humidity and an ambient temperature of 75 degrees Fahrenheit.

  • Due to the air curtain, you’ll want to keep this unit away from your HVAC, fans, and open doorways in order to maintain the integrity of the refrigeration.

  • Keep this unit away from sunlit areas.

  • These units operate most efficiently when fully stocked.

  • DO NOT display unpackaged or open food items.

  • Place items in the unit that are already cold, as these display units are not designed to chill warm foods. Rather, they should be considered a ‘cold holding unit’.

  • Utilize a night cover to keep the unit insulated during off hours.

  • They come in both vertical and horizontal options.

Glass Door Reach-In Refrigerators

These units can be located in front-of-house or in customer areas. These units come with two door styles:


Door Type

Guidelines

PROS

CONS

Swinging

Equipped with an open-stay feature, these doors can potentially block traffic and be an issue for kitchens or establishments with limited space.

  • Seal better than sliding doors

  • Potentially more energy efficient

  • Can block traffic in aisles

Sliding

Ideal for establishments with limited space and narrow aisles, sliding doors don’t block the flow of traffic in a kitchen when opened.

  • Don’t block traffic in aisles

  • Only one door can be opened at a time

  • Don’t seal as well as swinging doors


There are a few additional tips to keep in mind as well when purchasing a reach-in glass door refrigerator:

  • Glass door refrigerators are able to hold packaged and open food products alike, but keep in mind that customer-accessible units (glass door merchandisers) should only store packaged items.

  • You can enhance the aesthetics of your glass door merchandiser display with bright interior lighting, transparent shelving, mirrored panels, pricing strips, and bottle shelves.

  • While traditional fluorescent bulbs still achieve desired brightness levels, a new push towards LED lighting is becoming prominent in the industry. LED lights have a brighter output, use less energy, create less heat, and are overall more efficient for lighting your display case.

Glass Door Bar Refrigeration

Undercounter refrigeration is key to utilizing space in a bar setting, but there are many areas behind the bar that are visible to patrons and can benefit from glass door display units. These wine and beer merchandisers can be selected in a variety of sizes from underbar (which can also sit on top of a counter) to a full-sized stand-alone unit. Keep these tips in mind when choosing your glass door bar refrigeration:

  • Opt for triple-paned glass or thermal doors to maximize the unit’s efficiency while reducing the risk of cracks or shatters due to an accidental bump during busy hours.

  • Keep items neatly organized and bottle labels facing forward on beer so that customers can fully view the selection without assistance before ordering.

Wine merchandisers are specialty types of glass door refrigeration for bars that are intended to display and store wines only.

  • Shelving can hold wine bottles horizontally (best for out-of-site or underbar units) or at an angle where customers can read labels. Just be sure that all labels are facing outwards.

  • These units are intended to be set at special temperatures designed specifically for wine storage that may not fall within normal refrigeration ranges of typical refrigerators. Most have drawers that pull out with circular indentations to keep the bottles stable.

Horizontal Refrigerated Display Cases

There are two types of refrigeration methods available for display cases without air curtains:


Refrigeration Type

Guidelines

Best for:

Forced Air

This type of refrigeration relies on fans to circulate cold air within the cavity. These units are less expensive, but items can dry out faster.

  • Prepackaged Products

  • Covered Pans

Gravity Coil

This refrigeration unit utilizes a coil at the top of the cabinet where cold air is emitted and falls down - via gravity - over the items.

  • Raw Meats

  • Seafoods (open sushi included)

  • Salads

  • Pies

  • Cakes

  • Danishes


In addition, closed display cases can have a curved glass front or angled front. Both reduce the glare from overhead lighting, so it’s mostly user preference that will determine what works best for your establishment. Keep in mind that many models will allow for the front glass to tilt up for easier cleaning.


Further Reading…


Additional Features to Consider:

  • End Panels: These can make your case appear fuller, and a mirrored end panel enhances the brightness as well.

  • Interior: Black interiors can minimize the appearance of hardware within the case while allowing colorful products to ‘pop’. Mirrored back panels can enhance the appearance of a fresh, full case even when your stock is low. Keep in mind that some health departments prefer and may even require white interiors for sanitation reasons.

  • Easy Access: Accessibility for cleaning should be an important consideration since you may need to clean your unit multiple times a day. Display cases with a lift up front glass are easier to access and clean. While reach-in merchandisers with doors tend to be easy to clean, some curved and angled glass models have a tilting feature to allow the front to open for easy cleaning.

Lighting:

  • Fluorescent Bulbs : Some fluorescent bulbs enhance certain colors, which can be beneficial for red meats and pastries. LED lighting is bright and uses less energy.

  • Top Lighting : Typically viewed as the minimal amount of lighting for closed cases.

  • Shelf Lighting : Can add brightness to each shelf rather than simply lighting from one source at the top.

Most health departments require that lights must be encapsulated in your merchandiser so that a broken bulb doesn’t throw shards of glass into food areas. While a well-lit case is more attractive, safety is always first. LED lighting does not have this restriction. Consider glass shelving and reflective back panels for lighting improvements.


Sizing:

  1. Space Constraints: As with any piece of equipment, your merchandiser will need to fit into your establishment without disrupting the flow of traffic.

  2. Opt for Oversizing: Remember that your typical traffic patterns may not cater to busy peak hours and, thus, you’ll want to invest in a case that is large enough for rush hours and weekends. But make sure that the staff behind the counter can easily move around and pass one another. Three feet is considered minimum.

  3. Consider the Products: If all of the products in your merchandiser have a short shelf life or quick turnaround time, you may be able to choose a smaller case - but at the sacrifice of increase labor costs. For instance, instead of displaying full-size pans, you would have half-size pans that would be replenished as needed. (Some deli cases have refrigerated storage beneath the display)

  4. Packaging: Whether it’s the plastics that your items are packaged in or the flaked ice you’re packing around cold foods, keep in mind that the cavity of your merchandiser needs to accommodate both the product and packaging.

  5. Clearance: Intakes and exhausts will will reduce the amount of useable space in your case. If people are working behind the unit, remember to leave enough space for them to work comfortably (at least 3 feet).

  6. Power Source: Refrigerated and freezer display cases generally require an electrical supply (and some a drain) within 6 feet of the unit.