A Guide to Choosing Slicers


Manual vs Automatic


There are two types of slicing machines: manual and automatic. Depending on your needs, products, and volume, you’re likely to opt for one machine over the other.

Propulsion

Guidelines

Best for:

Manual

Staff must propel the product tray over the blade to slice the product manually.

  • Lighter Use

  • Small Volumes of Product

Automatic

An electric motor propels the product tray back and forth, cutting out the labor of moving the tray by hand. You can operate these as manual slicers as well.

  • Large Volumes of Product

  • Constant Slicing Needs

  • Large Delis

  • Supermarkets


Because of the innate and vast differences between manual and automatic slicing machines, this guide is broken down first into the intricacies of automatic slicing machines and then into manual slicing equipment at the end.


AUTOMATIC SLICING MACHINES


Design


To understand which model may be best for your operation, it’s important to understand all of the working parts of a slicer, as these parts can have a huge impact on what you’re able to slice.

  • Product Table: Known also as the carriage or product tray, the size of this area can vary drastically, impacting the sizes of items you’re able to place on the slicer itself. While most carriages can hold items that are 7 ½” - 12” in diameter, always verify before purchase if you’re planning on slicing items with larger diameters, as some simply cannot accommodate larger size items.

  • Pusher: Also known as a grip or meat grip, the pusher holds food items in place for safer slicing. Keep in mind that many of these are removable for easier cleaning.

  • Gauge Plate: This area moves when you’re adjusting the thickness control knob. It surrounds the knife and allows for different thickness slices for your products.

  • Sharpener: The built-in blade sharpener keeps your cuts razor-sharp and can be removed for easy cleaning.

  • Blade and Blade Guard: The blade is what bears the brunt of the work for your slicer, and the blade guard keeps fingers safely blocked from the sharp edge. While the guard is removable for cleaning, many blades are permanent fixtures (depending on the model).

    • Sizing: While a 12” blade is standard industry size, there are other size blades available as well (the guideline below isn’t set-in-stone, so check your slicer’s specs before purchase).

Slicer Type

Blade Size

Best for:

Entry Level Model

9”-10”

Light Use

Mid Tier/Premium

12”-14”

All-Around Use


Types


There are certain categories of slicers that are built for different usages and duties. These guidelines should be used as a guide, but always check the specs for your slicer before purchase:


Slicer Type

Guidelines

Best for:

Entry Level

As the name implies, these slicers are built for lighter uses of only an hour or two a day. The design is simplistic yet safe, but if you’re looking to slice difficult items like cheese, then stay away from these models. While these may be cheaper, they’ll burn out quickly if used beyond their intended capacities.

  • Light Use

  • Deli Meats

  • 1-2 Hours/Day Use

Mid-Tier

Built with larger blades and more horsepower, these are built for slightly more use than entry level models and can slice cheese on occasion.

  • Deli Meat

  • Veggies

  • 3-4 Hours/Day Use

Premium

As the top-of-the-line option, premium slicers can handle delicate items like cheese and constant, heavy-duty, daily use.

  • Deli Meat

  • Veggies

  • Cheese

  • Consistent Use


Belt vs Gear Driven


Drive

PROS

CONS

Belt-Driven

  • Most slicers come in this style

  • Cheaper maintenance

  • Slightly less durable

Gear-Driven

  • Typically more durable

  • When it does need maintenance, these will be costlier to repair


Features to Consider


In addition, there are other details that can impact the efficacy of your slicer for your kitchen’s needs:

  • Horsepower: Higher horsepower is best for more frequent use, so you’ll find that the premium models typically have the highest horsepower.

  • Cleaning Leg/Kickstand: This feature props the slicer up for access to underneath the carriage for easier cleaning.

  • No Volt Release: If your unit gets unplugged during operation or unplugged for cleaning, this safety feature requires the user to push the power button to restart the slicer.

  • Gauge Plate Interlock: As an added safety feature, the gauge plate interlock requires the gauge plate to be set to zero before being moved or tilted to protect the blade and the user’s fingers.  


Specialty Slicers: Bread Slicer


In addition to the standard ‘meat slicer’ (which is typically a misnomer, as these slicers - as stated above - can also slice veggies and cheese), there are specialty slicers to consider as well for certain operations and products.


Bread slicers are specifically designed for slicing loaves of bread or bagels into halves. These are available in both countertop and floor models. Consider these slicers best for bakeries, delis serving fresh sandwiches, and supermarkets that bake bread on-site. Choose between countertop models for smaller operations or smaller outputs, or opt for a floor model for kitchens with a large emphasis on bread products.


MANUAL SLICING EQUIPMENT


For kitchens that don’t have large volumes of product that needs slicing, it’s best to opt for manual slicing equipment over automatic slicing machines. These pieces of equipment handle light loads and typically take up less space in your kitchen.


Slicer Type

Guidelines

Best for:

Egg Slicer

Simplistic in design, these slicers are built for single products like a hard-boiled egg or single strawberry, allowing the user to slice small portions for salad toppings or accent garnishes.

  • Eggs

  • Soft Produce

  • Single-servings

  • Garnishes

Mandolin Slicer

With a simplistic design, the mandolin slicer is great for slicing small amounts of products for specialty needs like sandwich toppings or even for plating decor. These are not intended for high-volume uses.

  • Small Volume Slicing Needs

  • Decorative Slices of Veggies

  • Sandwich Toppings

Tomato/Soft Fruits & Veggies Slicer

While this category is generic, the slicers differentiate themselves from the standard meat slicer in that their primary purpose is to slice bulk amounts of soft fruits and veggies like tomatoes. Some larger models can accommodate slightly tougher produce as well as some cooked chicken, making it ideal for cafes with salads and sandwiches.

  • Cafe

  • Sandwich Shop

  • Deli

Laser Slicer

If you prepare a lot of sliced tomato product, then perhaps a tomato laser slicer is the right tool for the job! These have removable stainless steel blade cartridges and staggered blade slicing systems specifically designed for slicing tomatoes.

  • Small Volume Outputs

  • Tomatoes

French Fry Cutter

As the name implies, these units are ideal for cutting perfect french fries, making them an essential for any fast-casual eatery with fresh cut french fries dominating the ‘sides’ selection.

  • Fast-Casual Eateries

  • Diners

  • French Fries

Lettuce Slicers

While these units can accept smaller produce, the carriage can also enlarge to suit items up to 6 inches high, making these great for large heads of lettuce.

  • Diners

  • Restaurants

  • Lettuce

  • Produce


Attachment Hubs


Note that the purchase of a freestanding slicer unit isn’t always appropriate for those who have smaller setups or smaller requirements for their slicer. These HUB attachments are available in a variety of slicing options, giving users the versatility to change the output to accommodate different sliced-good needs.