Delfield CAB4-813QT Dispenser

Delfield CAB4-813QT Dispenser
Free Freight
Price $5,357

for more information

Price $3,896

You will earn 3,896 Reward Points. Earn 1 reward point for every 1 dollar spent.
Read more.

FINANCEFOR $97.71/mo.

Width (in)32.25
Height (in)36
Depth (in)32.25
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Dispenser, Heated Dish, enclosed mobile design, four self-elevating dish dispensing tubes, maximum dish size 8.12" diameter, stainless steel construction, with 700 watt heating element & stainless steel dome cover, 4" casters, cUL, UL, NSF

Standard Features:
  • Non-marring gray corner bumpers
  • Spring supports to be 14-gauge S/S
  • Field adjustable self-leveling mechanism
  • (4) 4.00” locking polyolefin swivel casters
  • One year parts and 90 day labor warranty
  • Cabinet top to be 16-gauge stainless steel
  • High impact plastic guide posts mounted to flange
  • Outer body and corners to be 20-gauge stainless steel
  • Dispenser flange, channels and bottom to be integrally welded
  • Carrier head made of welded rods with a removable 18-gauge top plate
  • Dispenser top flange, vertical side channels and bottom brace are stainless steel
  • Heated, QT & ET Features
    • 9’ cord and plug
    • Air intake shall be filtered
    • On/off switch on each dispenser
    • ET maintains 120-140°F (49-60°C)
    • QT maintains 150-170°F (66-77°C)
    • Adjustable thermostat per dispenser
    • QT- stainless steel cover per dispenser
    • 22-gauge stainless steel jacket around dispenser
    • Convection heating module and fan motor per dispenser
Options & Accessories
  • Wrap-around bumpers
  • Four 4” or 5” polyurethane casters
  • Hold-down rod for dispenser tubes
  • Flange-mount feet in lieu of casters
  • Shorten dispenser tubes to special length
  • 220 volt, 50/60 cycle, single phase electrical connections
  • Stainless steel tube cover (-500 through -725 models only)
  • Stainless steel dome cover (-813 through -1450 models only)
  • 12” diameter S/S dish dispenser tray (-1200 and -1450 models only)
  • Rods for oval dishes and diameter adjustment (-813 through -1450 only)
  • Note: Inclusion of these options will alter the electrical specifications of unit 
Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels. Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel. Unit shall have four 4.00" (10cm) diameter polyolefin swivel casters, and non-marking gray bumpers at each corner. Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel. Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate.
Shorten dispenser
Casters or flanged feet
Exterior panels
Extended warranty
Options & accessories
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Delfield CAB4-813QT Dispenser
CAB4-813QT Dispenser
Contact Us
1 (800) 555-0666