Delfield D4427N-8 Sandwich/Salad Top Refrigerator

D4427N-8
Delfield D4427N-8 Sandwich/Salad Top Refrigerator
Free Freight
Price $2,424

You will earn 3,456 Reward Points.

You will earn 2,424 Reward Points.

FINANCEFOR $60.79/mo.

Delfield
More from Delfield
PayPal CREDIT
Specs
BrandDelfield
Casters5" casters
Capacity5.7 Cubic Feet
Compressor TypeRear Mounted
Number of Drawers2
Sections1
Width (in)27
Height (in)36
Depth (in)31.5
You May Also Need


Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Description
Sandwich/Salad Top Refrigerator, single-section, 27" W, 5.7 cubic feet, (2) drawers, stainless steel top with polyethylene cutting board & (8) 1/6 size plastic pans, ABS interior sides, stainless steel front & sides, 5" casters, front breathing rear-mounted refrigeration system, 1/5 hp
Standard Features:
  • 6’ cord and plug supplied
  • Black recessed quick grip handle
  • ACT solid state electronic control
  • Environmentally friendly R404A refrigerant
  • Durable, rugged stainless steel sides, top and front
  • Standard on 5” casters for easy cleaning and installation
  • One epoxy coated wire shelf standard, installed per door section
  • Patented air screen ensures product stays cold without drying it out
  • Delfield supplies 1/6 size pans and positive placement adapter bars for top opening
  • Three year parts and labor warranty and an additional two year compressor parts warranty
  • “D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly
  • Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with antimicrobial agent
  • All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up
  • Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty
  • Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance. Not available for eight pan models
  • High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low
Options & Accessories:
  • Door lock
  • Flat lift off cover
  • Exterior thermometer
  • Additional wire shelves
  • Plastic laminate on front
  • 3” casters, 3.75” ride height
  • Stainless steel finish on back
  • 220V/50 Hertz electrical system
  • Overshelf, (six pan models only)
  • Inclusion of this option will alter electrical specifications of the unit
Specifications:
Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.4cm) square nosing on the front. Top of drawer unit has one opening to accept six or eight 1/6-size 4” (10cm) deep pans. Top of door unit has one opening to accept six or eight 1/6-size 4” or 6” (10cm or 15cm) deep pans. Adapter bars and 1/6 size pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 27” x 10” x .5” (68.6cm x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge. Dual level pan brackets allow the pans to be lowered an additional inch in the unit without tools to provide additional pan temperature holding performance. Not available for eight pan capacity models. Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel. Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coil is located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C). ACT control: ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions. Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 6’ (1.8m) long electrical cord and NEMA 5-15P plug. Casters: Equipment is mounted on 5” (13cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6cm). Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf. Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6 size pans. Bottom drawer holds one full size 12 x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.
Options
Drawer lock
Cutting boards & tray slides
Freight Note
Additional shelf, door lock & thermometer
Lid options
Drawer warranty
Cut-out
Refrigeration
Overshelf
Finish options
Voltages
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Delfield D4427N-8 Sandwich/Salad Top Refrigerator
D4427N-8 Sandwich/Salad Top Refrigerator
$3,456