Delfield DIS-913-QT Heated Shielded Round Drop-In Dish Dispenser for 8-1/8 to 9-1/8" Dishes
Call us for price
1-800-555-0666Delfield DIS-913-QT Specifications
Brand | Delfield |
---|---|
Certifications | NSF |
Type | Heated |
Dish Diameter | for 8-1/8 to 9-1/8" Dishes |
Shape | Round |
Style | Shielded |
Voltage | 120 Volts |
Height (in) | 28 |
Weight | 32 |
Additional Information on Delfield DIS-913-QT
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield DIS-913-QT Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Delfield DIS-913-QT Description
The DIS-913-QT drop-in quick-temp heated dish dispenser is a great choice for operations that require storage, dispensing, and heating of dishware with 8.12" to 9.12" diameter. Suitable for 28" high spaces, this dispenser has a 11.87" cutout diameter and 12.5" flange diameter that should safely support a maximum stack height of 24" or approximately 72 dishes. This unit heats up the plates quickly from 150 degrees Fahrenheit to 170 degrees Fahrenheit using the 700-watt convection heating element with fan motor. An air intake filter guards against contaminants to keep the unity sanitary.
The stainless steel construction makes this drop-in plate dispenser reliably tough through challenging environments and overall easy to maintain and own! The welded dispenser tube components stainless steel welded rods and removable plate on the dish carrier head boost the sturdiness of the unit.
There is an on/off switch and thermostat for simple operation. A self-leveling mechanism is triggered after a plate is removed in order to keep the next plates on the stack visible and within reach. You can even add or take stainless steel spring supports to set the ideal height and tension on the side channels. The three (3) high-impact flange guideposts make for safe transport by barricading the top plates above the flange.
This Delfield drop-in quick-temp dish dispenser comes with cUL, UL, and NSF certifications. It is rated at 5.5 amps and requires a 120/60/1 electrical connection. A 4' (2.7m) cord with NEMA 5-15P plug is supplied. Enjoy a one-year parts warranty and a 90-day labor standard warranty.
Get the best food holding and warming equipment only here at CKitchen!
Standard Features:
- Spring supports to be stainless steel
- High impact plastic guide posts mounted to flange
- One year parts and 90 day labor standard warranty
- Flange, channels and bottom to be integrally welded
- Carrier head made of welded rods with a removable top plate
- Top flange, bottom brace and vertical side channels are stainless steel
- Self-leveling mechanism, field adjustable by adding or removing springs
- DIS-ET/QT Series Only
- 4’ cord and plug
- Filtered air intake
- Outer stainless steel jacket
- QT- Shall have a stainless steel cover
- On/off switch and adjustable thermostat
- Convection heating module and fan motor
- ET temperature range is 120-140°F (49-60°C)
- QT temperature range is 150-170°F (66-77°C)
- Special voltages
- Hold-down rod for dispenser tubes
- Shorten dispenser tubes to special length
- Stainless steel tube cover (500-725 sizes only)
- Stainless steel outer jacket for dispenser tubes-non-heated (standard on ET or QT)
- Non-marring adjustment rods for oval dishes and various dish diameters (813–1450 sizes only)
- Stainless steel dome cover with access to dishes (813-1450 sizes only; standard on QT models)
- 12.00” (30cm) dia. stainless steel dish dispenser tray (DIS-1200, DIS-1200-ET and DIS-1200-QT only)
Delfield DIS-913-QT Accessories
Delfield DIS-913-QT Reviews
There are no reviews yet for this product.