Delfield T-1422 Dispenser

T-1422
Delfield T-1422 Dispenser
Free Freight
Price $1,740

You will earn 2,480 Reward Points.

You will earn 1,740 Reward Points.

FINANCEFOR $43.64/mo.

Delfield
More from Delfield
PayPal CREDIT
Specs
BrandDelfield
Width (in)28.75
Height (in)36
Depth (in)22.12
Weight162
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Description
Dispenser, Tray, enclosed mobile design, single self-leveling tray platform, for 14" x 22" trays, 4" casters, cUL, UL, NSF
Standard Features:
  • T Series Only
    • Non-marring corner gray bumpers
    • Cabinet sides to be 20 gauge stainless steel
    • (4) 4.00” polyolefin swivel casters (all locking)
    • Cabinet bottom to be 14 gauge galvanized steel
    • One year parts and 90 day labor standard warranty
    • Cabinet top to be 16 gauge stainless steel, welded, polished and reinforced
    • Dispenser platform carrier shall be 18 gauge stainless steel and removable for cleaning
    • Self-leveling mechanisms shall be adjustable by adding and removing stainless steel extension springs located inside the elevator housing
  • T/T2-H Series Only
    • Adjustable thermostat
    • Air intake is standard with filter
    • One year parts and 90 day labor warranty
    • On/off switch and 9’ cord and plug standard
    • Temperature between 150-170°F (66-77°C)
    • Dispenser is heated with convection heated modules
    • Heated dispenser has a stainless steel liner and 2.00” of fiberglass insulation
Options & Accessories:
  • Special height
  • Laminate panels
  • Wrap-around bumpers
  • Special tray & rack sizes
  • 4” or 5” polyurethane casters
  • Flange-mount feet in lieu of casters
  • Additional plastic or stainless steel silverware cylinders
  • Six, eight, or ten hole silverware bins with plastic or stainless steel cylinders
Specifications:
Cabinet top shall be 16-gauge stainless steel with all corners welded, polished and reinforced with heavy-gauge channels. Cabinet exterior panels shall be 20-gauge stainless steel. Bottom shall be 14-gauge galvanized steel. Unit shall have (4) 4.00” (10cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner. Dispenser platform carrier shall be 18-gauge stainless steel and shall be removable for cleaning. Each dispenser shall be field adjustable by adding or removing stainless steel extension springs located inside the elevator housing. The Following Applies To T/T2-H Heated Dispensers Only: Heated dispensers shall have a stainless steel liner separated from the outer panels by 2.00” (5cm) of fiberglass insulation. Unit shall be supplied with 9’ (2.7m) cord and plug as shown in the specifications table on reverse. Electrical connections shall be 120 volt, 60 hertz, and single phase. Dispenser shall have one or two convection heating modules consisting of a single 700-watt heating element and fan motor, located in the center of the interior bottom cavity. (Heated T/ T2 models 1014-1422 shall have one module; larger models have two modules.) Air intake shall have a filter. Dispenser shall have an adjustable thermostat and an ON/OFF switch on the side of the unit. Unit shall maintain a temperature between 150°F-170°F (66°C-77°C).
Options
Freight Note
Height modification
Napkin & silverware dispenser
Bumper, flanged feet & casters
Dust cover
Panels
Parts & labor warranty
Extended warranty
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Delfield T-1422 Dispenser
T-1422 Dispenser
$2,480