Lakeside Manufacturing Manufacturing 958 Tough Transport Utility Cart
958


Lakeside Manufacturing 958 Tough Transport Utility Cart
Specs | |
---|---|
Brand | Lakeside Manufacturing |
Made in | USA |
Material | Stainless Steel |
Width (in) | 55.00 |
Height (in) | 37.00 |
Depth (in) | 22.75 |
Length (in) | 55 |
Weight | 123.00 |
You May Also Need
Additional Information





A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Description
Tough Transport® Utility Cart, 2-tier, 55"W x 22-3/4"D x 37"H, stainless steel construction, open base U-frame with angled stainless steel, 21" x 49" 14-gauge shelves with reinforced edges, 21" shelf clearance, 1" O.D. tube push handle with bumpers, (2) 6" bumpers riveted to front legs, 1000 lb. capacity, (2) 5" reinforced swivel plate casters & (2) 8" fixed casters with non-marking polyurethane wheels, NSF Standard Features:
Rugged “U” Frame With Angled Stainless Steel For Added Strength.
- All joints are continuous heliarc welded.
- Steam clean or wipe down. Sanitizes easily.
- Stainless steel construction resists staining and rusting.
- Shelves are 14 gauge stainless steel with reinforced edges.
- 1000 lb. (450 kg) capacity is ideal for continuous hauling of heavy loads over uneven floors and outdoor surfaces.
Optional Accessories:
- All 5” swivel casters
- Extended perimeter bumper
- Ground and polished joint welds
- Set of 2 each 5” (127 mm) brake casters
Specifications:
Unit shall be of fully welded stainless steel construction. Legs and frame shall be of U-frame design, eliminating the need for corner reinforcements. Shelves shall be of 14-gauge stainless steel, and shall be continuously TIG welded to vertical leg frames. Shelves shall be reinforced front and back with 18-gauge angle welded to the shelf underside. Unit shall have two each 5” (127 mm) diameter extra-load swivel casters with 1-1/4” (32 mm) wide non-marking polyurethane wheels, and 2 each 8” diameter extra-load wheels mounted to a fixed axle. Swivel casters shall be plate type and shall be bolted to an 18-gauge 5” wide stainless steel cross member with a galvanized reinforcement. Unit shall have push handle made of 18 gauge 1” O.D stainless steel tubing. Handle mounting brackets shall be continuously TIG welded to vertical leg frame. Unit shall have two each bumpers mounted to handle ends and two each 6” (152 mm) bumpers riveted to front legs. Unit shall be NSF listed.
Customer Reviews
If you've used this product, share your summary, photo and video of it. Earn up to $16 per product.
Write a text review — earn $2, post a product photo — earn $4, post a product video — earn $10
There are no reviews yet for this product.
Questions and Answers