Market Forge Industries 3500M42MT10G Convection Steamer/Kettle Combination
Photo of the Market Forge Industries 3500M42MT10G Convection Steamer/Kettle Combination
|Legs||(4) 6" Adjustable legs|
|Valve Type||Steam Control|
|Pan Capacity||(3) 12" x 20" x 2-1/2"|
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Each cooking compartment on the 3500 has a positive slam action, field-reversible door constructed of Type 304 stainless steel. Door latches are spring loaded. The inner door gasket is a one-piece NSF-approved silicone rubber gasket. The cooking compartment is equipped with a door interlock (switch) that shuts off steam to the cooking compartment when the door is opened. Factory installs units with the door opening from the right, see diagram. Each compartment will be equipped with a perforated steam inlet baffle positioned for precise application of high-velocity steam across the surface of food. Controls for each compartment will include a 60-minute timer with constant steam mode, an indicator light, steam inlet solenoid valve, pressure relief valve, vacuum breaker, an automatic cold water condenser, and a removable drip trough. Each compartment will be independently and automatically controlled by setting the cooking time on the 60-minute timer. At the end of cooking time, the indicator light will turn off and a continuous signal will sound. Signal is silenced by returning the timer to the OFF position.
Stainless steel cabinet base will match other Market Forge stainless steel equipment and enclose steam boiler. Base with stainless steel frame will be equipped with 6” (152mm) stainless steel legs and adjustable bullet feet, reinforced stainless steel counter-top, and stainless steel lift-off front cover and left front door.
The CSD-1 compliant steam boiler comes standard with a Pilotless Ignition System and Nickel Plating. The steam boiler will be automatically filled with water and brought to pressure when water and heat switches are turned on and automatically drained under pressure when water and heat switches are turned off. A cold water condenser will automatically condense all exhausted steam into water before it is released from the cooker and steam generator drain. Unit also includes safety valve, low water cut-off, water strainer, cathodic protector, and also includes an access for total concept delimer/descaler, and PM Plus (a corrosion inhibitor).
The 6, 10 and 12 gallon steam jacketed kettle comes equipped with a hot and cold faucet, sink with splash guard and a steam control valve.
Options & Accessories: (Additional Charge)
- Pans & Covers
- 12” x 20” pan cover
- 12” x 20” x 1” solid pan
- 12” x 20” x 4” solid pan
- 12” x 20” x 6” solid pan
- 12” x 20” x 2-1/2” solid pan
- 12” x 20” x 1” perforated pan
- 12” x 20” x 4” perforated pan
- 12” x 20” x 6” perforated pan
- 12” x 20” x 2-1/2” perforated pan
- Steam Take Off Kit
- Digital Countdown Timer
- 60” water hose kit with quick disconnect
- Prison package, includes lockable stainless steel hinged control cover, tamper proof screws, (2) 4” adjustable front flanged feet
- Gas fired, A.S.M.E. constructed and National Board Registered, 15 PSI (1 kg/cm2) steam boiler rated at 200,000 BTU.
- Boiler shall be equipped for operation with:
- LP Gas
- Natural Gas
- Each steamer compartment will accommodate the following:
- (2) 12” x 20’’ x 4” deep pan
- (6) 12” x 20” x 1 “ deep pans
- (3) 12” x 20” x 21/2 “ deep pans
- 3500M42MT6G - 825 lbs (374 kg)
- 3500M42MT10G - 830 lbs (376 kg)
- 3500M42MT12G - 835 lbs (379 kg)
If you've used this product, share your summary, photo and video of it. Earn up to $16 per product.
Write a text review — earn $0.02, post a product photo — earn $0.04, post a product video — earn $0.10
There are no reviews yet for this product.