Master-Bilt Products IHC-27 Ice Cream Hardening & Holding Cabinet

Made in USA
Master-Bilt Products IHC-27 Ice Cream Hardening & Holding Cabinet
Free Freight
Retail Price $7,148
Price $5,642

FINANCEFOR $141.50/mo.

Number of Gallon3 gallon
Made inUSA
Interior FinishAluminum
Temperature Range-0 to -37 F
Height (in)82.00
Depth (in)36.00
You May Also Need

Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Ice Cream Hardening & Holding Cabinet, one-section, (20) 3 gallon capacity, digital therm., (4) heavy duty wire shelves, interior doors, stainless steel front doors, aluminum interior & ends, temperature range -0 to -37F, 1 hp, 208-230v/60/1-ph, 7.4 amps, 8' cord, NEMA 6-15P, cULus, NSF

Standard Features:
  • Standard Electronic Control
    • Audible and visual alarm
    • Decreases service time and calls
    • Allows user to easily monitor defrost functions from the panel interface on the front of the merchandiser
    • Eliminates room thermostat, defrost termination/fan delay control, defrost timer and digital thermometer or other temperature indicator
  • Construction
    • Heavy-duty 6"-7" adjustable legs
    • 2 1/2" foamed-in-place “zero ODP” urethane insulation
    • 4 heavy-duty welded wire gray epoxy coated cantilever shelves per section
  • Finish
    • Stainless steel front
    • Anodized aluminum sides and interior
  • Doors
    • Lift-off inner and outer doors
    • Heavy-duty horizontal door handle
    • Anti-condensate door frame heater
    • 2" stainless steel foamed-in-place doors
    • Sure-sealing magnetic gaskets (replaceable)
    • Self-closing doors with 90° hold-open feature
    • Door swing: IHC-27 - hinged left, IHC-48 - left door hinged left, right door hinged right
    • Two staggered height, energy saving insulated inner doors with magnetic catches per section
  • Refrigeration
    • Refrigerant: R-404A
    • Minimum 4" clearance required between cabinet back and wall
    • Self-contained, top mounted, semi-hermetic refrigeration system 
    • Temperature range: 0° to -37°F (-18° to -38°C)
    • R-factor (insulation efficiency rating): 21.55 on walls, 17.24 on doors
    • Drain plumbing hookup recommended. Condensate pan available if there is no access to drain plumbing. Condensate pan must be field installed and requires a dedicated 15 amp, 120 volt circuit.
  • Standard limited two year parts and labor
  • Additional three year coverage on compressor part
  • Casters
  • Pan rack
  • Voltage boosting transformer
  • Condensate evaporator drain pan
  • Add suffix “R” for remote system on IHC-48 only
  • Extra welded wire gray epoxy coated cantilever shelves
  • NOTE: Must be field installed and requires a dedicated 15A, 120v circuit.
Cabinet will be equipped with an electronically controlled monitoring system. It will also be provided with 6"-7" adjustable legs, four welded wire, gray epoxy-coated cantilever shelves, 21/2" foamed-in-place “zero ODP” urethane insulated walls. Cabinet to have stainless front with anodized aluminum sides and interior. Cabinet also to have 2" stainless steel, self-closing, foamed-in-place doors. Interior doors to be provided with cabinet. The refrigeration system is to be top mounted, self-contained and use R-404A refrigerant. The temperature range will be 0° to -37°F (-18° to -38°C). Cabinet to have standard limited two year parts and labor with additional three year coverage on compressor part. Cabinet to be UL, C-UL and NSF listed.

Compressor warranty
What is included
  • Compressor warranty: Five year compressor part warranty
  • Warranty: Two year parts and labor warranty
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Master-Bilt Products IHC-27 Ice Cream Hardening & Holding Cabinet
IHC-27 Ice Cream Hardening & Holding Cabinet