Traulsen ULT48-LR Dealer's Choice Compact Undercounter Freezer
- 2020 model, meets the newest EPA and DOE codes.
- 8' Cord & Plug Attached
- Anodized Aluminum Interior
- Interior Mounted Thermometer
- Five Year Compressor Warranty
- Three Year Parts And Labor Warranty
- Anodized Aluminum Interior Door Liner
- Stainless Steel Exterior Top, Sides & Doors
- Magnetic Snap-In EZ-Clean Door Gasket(s)
- Environmentally Friendly R-404A Refrigerant
- Automatic Non-Electric Condensate Evaporator
- Front Breathing Self-Contained Refrigeration System
- Two (2) Powder Coated Shelves Per Door, Mounted On Pilasters
- Set of Four (4) 6" High Adjustable Legs (6 For 60" & 72" models)
- Self-Closing Stainless Steel Doors With Stay Open Feature at 105 Degrees
- SHELF CPW1 (additional shelf for all 27" models)
- SHELF CPW2 (additional shelf for all 32" models)
- SHELF48 UPPER (upper shelf for all 48" models)
- SHELF48 LOWER (lower shelf for all 48" models)
- SHELF60 UPPER (upper shelf for all 60" models)
- SHELF60 LOWER (lower shelf for all 60" models)
- SHELF72 UPPER (upper shelf for all 72" models)
- SHELF72 LOWER (lower shelf for all 72" models)
- CASTER 5SET6 (six 6" high casters for 60" & 72" model)
- CASTER 2SET4 (four 2-3/4" high casters for 48" models)
- CASTER 60SET3 (six 4" high casters for 60" & 72"model)
- CASTER SET4 (six 3-1/2" high casters for 60" & 72" model)
- CASTER 2SET6 (six 2-3/4" high casters for 60" & 72" models)
- CASTER 5SET4 (four 6" high casters for 27", 32" & 48" models)
- CASTER SET2IN (four 2-1/2" high casters for 27" & 32" models)
- CASTER SET4IN (four 4" high casters for 27", 32" & 48" models)
- CASTER SET3IN (four 3-1/2" high casters for 27", 32" & 48" models)
- CU27TOP BSWO (22 ga. stainless steel top with 4" backsplash ULT27)
- CU32TOP BSWO (22 ga. stainless steel top with 4" backsplash ULT32)
- CU48TOP BSWO (22 ga. stainless steel top with 4" backsplash ULT48)
- CU60TOP BSWO (22 ga. stainless steel top with 4" backsplash ULT60)
- CU72TOP BSWO (22 ga. stainless steel top with 4" backsplash ULT72)
- Optional accessory kits shipped separately for field installation.
- Other Door Hingings
- Stainless Steel Finished Back
Construction, Hardware and Insulation
- Cabinet exterior front, one piece sides, and doors are constructed of 22 gauge stainless steel. Cabinet interior and door liners are constructed of anodized aluminum. The exterior cabinet back and bottom are constructed of galvanized steel. Door self close at less than 90 degrees and also include a stay open feature at 105 degrees. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
- A balanced, rear mounted, front breathing, self-contained refrigeration system using R-404Arefrigerant is provided. It features a TXV valve, air-cooled hermetic compressor, a forced air evaporator coil and a non-electric condensate evaporator. An 8' cord and plug is provided. Standard operating temperature for freezer models is 0 to -5°F.
- Standard interior arrangements include two (2) powder coated wire shelves per door, mounted on pilasters. These are adjustable in 1/2" increments, allowing for a minimum of 1-1/2" spacing between shelves.
- Both a three year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard.
|Legs||6" adjustable legs|
|Capacity||13.1 Cubic Feet|
|Compressor Type||Rear Mounted|
|Temperature Range||-5 - 0 Degrees F|
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
If you've used this product, share your summary, photo and video of it. Earn up to $16 per product.
Write a text review — earn $2, post a product photo — earn $4, post a product video — earn $10
There are no reviews yet for this product.