ACCUREX Baffle Filter Canopy Hood, Wall Style, Exhaust Only with Single Wall Front
SKU#: XBEW
1/2
Additional Information on ACCUREX XBEW
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
ACCUREX XBEW Description
Provide Accurex Exhaust Hood Model XBEW as shown on plans and in accordance with the following
specification:
Kitchen Ventilation hood(s) shall be of the Type I, exhaust only wall low proximity. The hood(s) shall be
U.L. 710 Listed without a fire damper (with optional) for 450°F or 600°F rated cooking appliances. Please
visit www.ul.com for U.L. 710 listing for performance and size options. Make-up air shall be independently
provided.
The hood(s) exterior shall be constructed of a minimum of 18 gauge 400 series stainless steel (300 series
optional). The hood(s) shall be constructed using the standing seam method for optimum strength and
with a Performance Enhancing Lip (PEL) to improve capture efficiency by turning air back into the hood.
An integral 3-inch air space is provided to meet NFPA® 96 clearance requirements against limited
combustible walls. Integral 3-inch air space may be omitted for non-combustible construction. All seams,
joints and penetrations of the hood enclosure shall be welded and/or liquid tight. Lighter material gauges,
alternate material types and finishes are not acceptable. All unexposed interior surfaces shall be
constructed of a minimum 18-gauge corrosion resistant steel including, but not limited to ducts, plenum,
and brackets.
The hood(s) shall include a filter housing constructed of the same material as the hood. The filters shall
be stainless steel baffle type (non-stick coating optional), U.L. 1046 Classified, and in sufficient number
and size to ensure optimum performance. The filter housing shall terminate in a pitched, full length grease
trough which shall drain into a removable grease container. These filters shall have a grease removal
efficiency of 28% at 8 microns (16% from 3-10 microns) and static pressure drop of 0.5-0.6 inWC.
Vapor proof, U.L. Listed incandescent (recessed, fluorescent and LED optional, restrictions apply) light
fixtures shall be pre-wired to a junction box located at the top of the hood for field connection. Wiring shall
conform to the requirements of the NFPA® 70.
ACCUREX XBEW Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to ACCUREX XBEW
Commercial Exhaust Hoods 372 products
