Beverage Air DW64HC-S-29 Frosty Brew™ Bottle Cooler

Frosty Brew™ Bottle Cooler, 65"W x 26-1/2"D x 33-3/4"H, 18.5 cu. ft., (2) sliding lids, (4) adjustable epoxy coated wire dividers, case capacity: 25-1/4 cases (12 oz. bottles) or 34-3/4 cases (12 oz. cans), flat top, holds below 32° F, deep well design, adjustable dividers, bottle cap opener & cap catcher, stainless steel exterior, galvanized interior, stainless steel top, self-contained refrigeration, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

If your establishment needs a solution that can quickly cool bottled or canned beverages and make serving them efficient the Beverage Air DW64HC-S-29 Frosty Brew™ Bottle Cooler might be the right unit to meet your needs. The interior has a total of 18.5 cu. ft. of storage capacity that can hold up to 25 ¼ cases in 12 oz. bottles or 34 ¾ cases in 12 oz. cans.

This unit features two sliding stainless steel lids that easily glide to provide immediate access to beverages. Beverages can then be served on the stainless steel countertop that comes complete with glass stops to prevent accidents. To prevent bottle caps from scattering onto the floor posing a safety hazard, this unit comes with a bottle cap lifter and catcher. The contents are kept organized with four epoxy-coated wire dividers. High RPM cooling fans get beverages frosty at a temperature between 30°F and 32°F as quickly as possible. 

The self-contained refrigeration system in this unit uses a ¼ HP compressor to produce 1702 BTU/hr of cooling to quickly cool beverages. The unit's epoxy-coated evaporator keeps the interior temperature stable reliably with minimal maintenance while fully electronic controls minimize power consumption and stress on the refrigeration system. Defrosting the unit is done automatically by a non-electric system that reduces downtime. The refrigerant used is R290, an eco-friendly hydrocarbon that meets strict environmental regulations.

The unit comes prewired from the factory with an 8-foot power cord and a NEMA 5-15P plug set to easily connect it to a standard outlet with 115v/60/1-ph power.