Beverage Air DW94HC-S Bottle Cooler

Bottle Cooler, flat top, 95"W x 26-5/8"D x 33-3/4"HD, 28.63 cu. ft., (4) sliding lids, (6) adjustable epoxy coated wire dividers, case capacity: 39 cases (12 oz. bottles) or 55-3/4 cases (12 oz. cans), deep well design, bottle cap opener & cap catcher, galvanized interior, stainless steel top & exterior, self-contained refrigeration system, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation

If your establishment needs to cool and store bottled or canned beverages the DW94HC-S Bottle Cooler from Beverage Air might be the right solution for you. This unit makes storing and serving bottled and canned beverages simple in a dependable package designed for commercial use. With 28.63 cu. ft. of capacity this unit can hold up to 55 ¾ cases of 12 oz. cans or 39 cases of 12 oz. bottles.

With four sliding lids made from stainless steel providing effortless access to bottles or cans and a stainless steel countertop complete with glass stops, this unit is a one-stop solution for conveniently serving beverages. To prevent bottle caps from scattering onto the floor posing a safety hazard, this unit comes with a bottle cap lifter and catcher. The contents are kept organized with six epoxy-coated wire dividers. To get beverages down to a temperature between 36°F and 40°F this unit has high RPM cooling fans.

This unit features a self-contained refrigeration system featuring a ¼ HP compressor that produces 1702 BTU/hr of heat rejection to quickly cool beverages The interior temperature is kept constant by the fully electronic controls while an epoxy-coated evaporator makes sure the refrigeration system requires as little maintenance as possible while providing refrigeration you can rely on. To meet all environmental regulations this unit uses R290 hydrocarbon refrigerant that minimizes negative effects on the atmosphere. An automatic non-electric defrost system provides convenience and minimizes downtime.

Connecting this unit to a standard outlet supplying 115v/60/1-ph power at 2.5 amps is simple with the factory-provided 8-foot power cable with a NEMA 5-15P plug set.