Beverage Air SMF34HC-1-W-02 School Milk Cooler
MPN#: SMF34HC-1-W-02
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Free Freight?
Quick Ship
$3,627.63
Product Protection
Starting at
- 2025 model, meets the newest EPA and DOE codes.
Beverage Air SMF34HC-1-W-02 Accessories
Description
Beverage Air SMF34HC-1-W-02 Description
School Milk Cooler, forced air, 34"W, 33-5/8"D, 13.59 cu. ft., single access, exterior digital thermometer, auto-defrost, (8) 13" x 13" x 11" or (4) 19" x 13" x 11" case capacity, self-latching doors/lids with safety bumpers, cylinder lock, wire floor racks, floor drain, electronic control, white exterior, stainless steel interior, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation
School Milk Cooler, forced air, 34" W, 33-1/2" D, 13.35 cu. ft., single access, exterior digital thermometer, (8) 13" x 13" x 11" or (4) 19" x 13" x 11" case capacity, white exterior, stainless steel interior, 7" heavy duty casters, (2) with brakes, R290 Hydrocarbon refrigerant, 1/5 hp, UL, cULus, UL EPH, NSF, MADE IN USA
Standard Features:
- SMF Series - Single Access, Forced-Air
- Forced-air milk coolers are designed to keep milk cold during prolonged serving periods.
- A continuous cold-air blanket over the milk containers keeps the milk cold and drinkable under 38°F) during serving.
- Cabinet Construction
- One-piece, reinforced stainless steel floor for maximum milk crate support.
- Balance of exterior is white finish on steel. Balance of interior is galvanized steel.
- Standard construction includes the lid, door, adjustable hinges, and door latches made from stainless steel.
- Exterior thermometer, cylinder lock, bottom drain, and 4” swivel casters (2 with locks) are provided as standard.
- Heavy-duty, epoxy coated steel wire floor racks are provided for added floor protection. Floor drain is centrally located for easy cleaning, connecting to drain hose with hose adapter.
- Models are also offered with stainless steel exterior in place of white finish on steel. A stainless steel interior is optionally available. Additional options include wrap around and corner bumpers.
- Foamed-in-place CFC and HCFC-free polyurethane insulation enhances the structural strength of the cabinet and helps increase energy efficiency. This insulation helps to prevent liquid penetration that results in foul odors. Overall depth of 31 1/2” allows easy mobility and clear passage through most doorways.
- Refrigeration System
- Refrigeration system uses R134a refrigerant, which is CFC and HCFC-free for compliance with environmental safety concerns.
- Special Features
- Stainless options available.
- One-piece, reinforced stainless steel floor for maximum support of milk crates.
Options
Q & A
Beverage Air SMF34HC-1-W-02 Specifications
| Refrigeration Type | Forced Air |
|---|---|
| Access Type | Single Sided |
| Finish | White |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Certifications | cULus, UL, UL EPH, UL EPH Classified, UL-Sanitation |
| Capacity | 13.5 cu. ft. |
| Temperature Range | 33 - 38 Degrees F |
| Voltage | 115 Volts |
| Width (in) | 34 |
| Height (in) | 46.88 |
| Depth (in) | 33.63 |
| Weight | 335 |
Additional Information on Beverage Air SMF34HC-1-W-02
Beverage Air SMF34HC-1-W-02 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Items Related to Beverage Air SMF34HC-1-W-02
Commercial Milk Coolers 131 products
