Glastender DI-DP12X24 Drip Tray Trough

Drip Tray Trough, drop-in, 24"W x 12"D, flanged self-rimming edge, removable perforated inserts, drain with 1/2" welded tailpiece, stainless steel construction, 22-1/4"W x 10-1/4"D cutout required, ETL-Sanitation (installation kit includes: 10 ft. of clear vinyl drain tube, (1) 4" Ty-wrap, (3) #10 x 1/2" black sheet metal screws, (3) cable clamps, (2) 1/2" x 1/2" plastic elbows) (NOTE: Made to order, not returnable)

The Glastender DI-DP12X24 Drip Tray Trough is a drop-in draining unit for installation directly into a bar top.

This unit is 12” front to back and 24” in width and comes with two removable perforated inserts. The drain pan has a flange with a self-rimming edge that allows it to be fit tightly to the bar top. The drain pan extends ¾” down into the bar top. Drainage is through a ½” tailpiece at the bottom of the unit.

The unit is made from stainless steel for easy cleaning and durability. This unit requires a cutout in the bar top 10-¼” front-to-back and 22-¼” wide. Installation is simple and includes a 10’ section of clear vinyl tubing for drainage, two 1/2" x 1/2" plastic elbows, three cable clamps, three #10 x 1/2" black sheet metal screws, three #10 x 1/2" stainless steel sheet metal screws,  and one 4" Ty-wrap

The Glastender DI-DP12X24 Drip Tray Trough is ETL-Sanitation certified.

• All stainless steel construction
• 18 gauge stainless steel pan with removable perforated inserts
• Drain consists of 1/2" tailpiece that exits from the bottom of the unit
• Drain pan flange includes self-rimming edge for tight fit to work surface
• Available in standard widths of 12" or 18" and lengths from 24" to 48". Custom sizes also available.