Beverage Air BM23HC-B-28 Without Tap Tower 1/2 Barrel Draft Beer Cooler - Black, 1 Keg Capacity, 115 Volts
- 2022 model, meets the newest EPA and DOE codes.
Additional 2 year compressor warranty, standard
|Number of Kegs||1 Keg|
|Number of Taps||None|
|Construction||Stainless and Galvanized Steel|
|Number of Doors||1|
If you’re looking for a compact and portable draft beer dispenser that doesn’t come with a draft arm the Beverage Air BM23HC-B-28 Draft Beverage Air Beer Cooler has you covered. This unit has 7.66 cu. ft. of cold storage to hold one ½ keg, four, ⅙ kegs, or two ¼ kegs.
The interior features galvanized steel construction for the walls and ceiling and a reinforced stainless steel floor and door sill for durability. The door is self-closing to keep it from being left ajar and features a magnetic gasket for a positive seal. The keg stored inside is kept secure with a standard door lock. This unit has no draft arm allowing you to install one of your own. The top is made from durable stainless steel and comes with a built-in drip tray. that connects to a waste bottle inside the unit eliminating the need for a floor drain.
The self-contained refrigeration system provides efficient cooling that you can rely on. The ⅙ HP compressor produces 1094 BTU/hr of cooling. Items inside are kept between 36ºF and 38ºF by the fully electronic controls. The refrigeration system also features an epoxy-coated evaporator coil to provide reliable refrigeration with minimal maintenance. Defrosting is accomplished automatically with a non-electric system to reduce downtime while keeping the interior free of frost. The refrigerant used is R290, an environmentally-friendly hydrocarbon that meets all environmental regulations.
An 8-foot power cable comes from the factory prewired with a NEMA 5-15P plug set for use with standard 115v/60/1-ph power.
- Cabinet Construction
- No draft arm
- Full electronic control
- Field reversible doors
- Four inch heavy duty casters
- Self-closing doors with locks, standard
- Beer waste bottle to capture beer from drain
- Magnetic door gaskets for positive door sealing
- Top is made from heavy-duty stainless steel including drip tray
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Interior construction utilizes galvanized steel on walls and ceiling, doorsill is stainless steel, reinforced floor made from heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Heavy-duty forced air refrigeration
- Automatic, non-electric evaporator
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine tap
- 1- 4 faucet
- Glass rinser
- Outdoor models
- Leg accessory kit
- Wine models available
- 2, 3, or 4-way manifold
- Dial/digital thermometer
- Stainless steel or black exterior club models available
UL (Underwriters Laboratories) approval for the US and Canada
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
NOTE! This is a general product line video and does not necessarily reflect the listed model.
2 of 2 reviews
If you've used this product, share your summary, photo and video of it. Earn up to $16.00 per product.
Write a text review — earn $0.02, post a product photo — earn $0.04, post a product video — earn $0.10