Everest Refrigeration ECF1 Nitro Cold Brew Coffee Dispenser

Everest Refrigeration ECF1 Description

Nitro Cold Brew Coffee Dispenser, one-section, 23-1/2"W, 8.0 cu. ft. capacity, self-contained rear mounted refrigeration, (1) solid hinged door (locking), holds (1) 1/2 barrel keg, (1) 3" diameter insulated stainless steel draft tower with single stout faucet, (1) 2 way air distributor, (1) 22 cu. ft. aluminum nitrogen gas tank, (1) dual gauge nitrogen regulator with shutoff valve, (1) 5 gallon cornelius keg, matching ball lock fittings, digital controls with LED display, auto defrost, LED interior lighting, stainless steel countertop and rail, textured & laminated black vinyl exterior, galvanized steel interior walls & stainless steel floor, R290 Hydrocarbon refrigerant, 1/5 HP, 115v/60/1-ph, 2.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

• 1 3/4" thick high density polyurethane insulation.
• Four pre-installed 5" swivel casters with locks on front set.
• Galvanized steel interior walls and high quality stainless steel floor.
• Heavy duty stainless steel countertop and rail with textured laminate, black vinyl exterior.

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

• High strength, recessed door handles.
• 1 3/4” thick high density polyurethane insulation.
• Pre-installed door locks keep your items safe from theft
• Tinted stainless steel exterior with galvanized steel interior.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.

• One single faucet, 3" diameter, stainless steel draft arm with matching air distributor. Fully insulated and NSF certified.

• Factory preset temperature, 35°F.
• Temperature setting range from 33°F to 54°F.
• Multi-function digital controller with easy to read LED display.
• Audible overheat protection alarm for compressor and condenser coil.

• 3” or 5” swivel casters with locks.
• 3.5” – 6” height-adjustable and interchangeable legs.
• Dual or triple faucet draft arms and matching air distributors.