Everest Refrigeration ETBR3 71.13'' 3 Section Undercounter Refrigerator with 3 Left/Right Hinged Solid Doors and Side / Rear Breathing Compressor

Everest Refrigeration ETBR3 Description

Undercounter/Worktop Refrigerator, three-section, 71-1/8"W, 22.0 cu. ft. capacity, self-contained rear mounted refrigeration, 16 gauge stainless steel worktop, (3) solid hinged self-closing doors (locking), (6) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, front air breathing, pressure relief port, stainless steel interior, stainless steel front & sides, galvanized steel bottom & rear, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 3.7 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Front air breathing for flexibility in installation.
• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Full-length air duct system ensures optimal circulation of cold air.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Pressure relief devices allow smooth access to cabinet interior when reopening doors.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Back mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.

• Galvanized steel bottom and rear.
• Four 5" swivel casters with locks on front set.
• 16 gauge, high quality stainless steel worktop.
• 2.5" thick high density polyurethane insulation.
• Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.

• High strength, recessed door handles.
• Heavy duty stainless steel interior / exterior.
• 2.5" thick high density polyurethane insulation.
• Frame heaters prevent exterior moisture build up.
• Pre-installed door locks keep your items safe from theft.
• Self-closing with adjustable torsion system for a positive seal.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.

• Height adjustable stainless steel clips.
• Two one epoxy coated, steel wire shelves per section.

• Multi-function digital controller with easy to read LED display.
• Audible overheat protection alarm for compressor and condenser coil.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.

• Additional shelving.
• 3” swivel casters with locks.
• 3.5” - 6” height-adjustable and interchangeable legs.
• 4” high stainless steel backsplash for worktop application.