Glastender ST24-S Flat Top Bottle Cooler
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
- 2025 model, meets the newest EPA and DOE codes.
Warranty
1 year parts & labor warranty, 5 year compressor warranty
2 year parts and labor warranty for self-contained refrigeration product (NOTE: applies to units sold and installed within the US & Canada)
Glastender ST24-S Accessories
Description
Glastender ST24-S Description
Flat Top Bottle Cooler, shallow well, 24"W x 24"D, self-contained refrigeration, 34°F (1°C) to 40°F (4°C) temperature range, (1) top sliding door with lock, (1) vertical wire partition, automatic defrost cycle & condensate evaporator, stainless steel exterior, interior & top, R290 refrigerant, 1/6 HP, cETLus, ETL-Sanitation, ETL Verified, Bottle Coolers
- Door lock(s)
- Automatic defrost cycle
- Self-contained refrigeration
- One-piece integral top and mullion design
- Optional 3-3/4″ casters or 6″ legs are available
- Six foot grounded cord & plug included (exits left rear)
- Automatic condensate evaporator - no drain connection required
- All stainless steel interior with radius corners is easy to keep clean
- Easy to plan exterior dimensions: 24″ front to back and 24″, 36″, 48″, 60″, 72″, or 96″ left to right
- Exterior available with black vinyl-clad steel front and sides and galvanized steel back, or stainless steel front, sides, and back
Options
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Glastender ST24-S Specifications
| Compressor Style | Front Breathing |
|---|---|
| Brand | Glastender |
| Horsepower | 1/10 - 1/6 HP |
| Refrigerant Type | R-134A |
| Bottle Cooler Capacity | 5-10 cu. ft. |
| Certifications | ETL, ETL-Sanitation |
| Exterior Finish | Stainless Steel |
| Compressor Location | Bottom Mounted |
| Door Type | Sliding |
| Voltage | 120 Volts |
| Width (in) | 24 |
| Height (in) | 34.5 |
| Depth (in) | 24 |
| Weight | 180.00 |
Additional Information on Glastender ST24-S
Glastender ST24-S Certifications
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
Items Related to Glastender ST24-S
