1 (800) 555-0666
Traulsen ALT332WUT-HHS 86.13'' 79.0 cu. ft. Top Mounted 3 Section Solid Half Door Reach-In Freezer

Traulsen ALT332WUT-HHS 86.13'' 79.0 cu. ft. Top Mounted 3 Section Solid Half Door Reach-In Freezer

ALT332WUT-HHS
Stock Status
Updating. Please wait...
Free Freight
$32,241.33

Contact us for your price

Call 1 (800) 555-0666
Mon-Fri 9AM-8PM, Sun 12-6PM ET

Why don't we show the price for this item?

$30,775.82

Contact us for your price

Call 1 (800) 555-0666
Mon-Fri 9AM-8PM, Sun 12-6PM ET

Why don't we show the price for this item?

You will earn 32241 Reward Points.

Product Protection
Coverage starting at
FINANCE

Monthly Payment *

Finance Payment Calculator
$661.37
* The above amount may vary depending on the applicant's credit history.
  • 2023 model, meets the newest EPA and DOE codes.
  • Usually ships in 4-6 weeks
Additional Options and Accessories are Available.
Please call:
1 (800) 555-0666

Traulsen ALT332WUT-HHS Specifications

Freezer Capacity79 cu. ft.
Door SizeHalf
Hinge LocationLeft/Right
ConstructionStainless Steel and Aluminum
Half DoorsYes
BrandTraulsen
Refrigerant TypeR-404A
CertificationscULus
Split DoorsYes
Number of Doors6
Number of Shelves9
Refrigeration SystemSelf-contained
Capacity71 - 121 cu. ft.
Compressor LocationTop Mounted
Door TypeSolid
Door DesignSwing
MaterialAluminium
Sections3
Temperature Range-10 Degrees F
Voltage115 Volts
Width (in)86.13
Height (in)83.25
Depth (in)35
Weight1000

Traulsen ALT332WUT-HHS Certifications

cULus

cULus

UL (Underwriters Laboratories) approval for the US and Canada

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

Traulsen ALT332WUT-HHS Description

Spec-Line Freezer, Reach-in, three-section, 79.0 cu. ft., self-contained refrigeration, StayClear™ Condenser, stainless steel exterior, aluminum interior, standard depth, wide half-height door or doors with EZ-Clean Gaskets, (3) adjustable wire shelves per section, microprocessor controls, unit can be programmed to operate at -10° F, 3/4 HP, cULus, NSF
Spec-Line Reach-In Freezer, three-section, 79.0 cu. ft., self-contained refrigeration, stainless steel exterior, aluminum interior, standard depth, wide half-height door or doors with Santoprene® EZ-Clean Gaskets, (3) adjustable wire shelves per section, INTELA-TRAUL™ microprocessor controls, unit can be programmed to operate at -10 degrees Fahrenheit (more commercial refrigerators and freezers available)

Standard Features:
The R & A Series represent Traulsen's Top-of-the-Line product offering. The “W-Width” reach-in freezer models are all designed to offer maximum interior storage capacity. Each is supplied standard with such high quality features as balanced refrigeration systems, microprocessor controls, communications ability and stainless steel exteriors. Additionally, they offer the widest range of optional accessories to choose from, and can be specified for use with many different applications, including: Foodservice, Correctional, Institutional, Export, etc. 
  • -10°F Capable
  • Biased Return Air Duct
  • 9' Cord & Plug Attached
  • Stainless Steel Breaker Caps
  • Five Year Compressor Warranty
  • Scroll Blower Type Evaporator Fan
  • Gasket-Protecting Metal Door Liner
  • Guaranteed For Life Cam-Lift Hinges
  • Three Year Parts And Labor Warranty
  • R-Series: Stainless Steel Exterior & Interior
  • Stainless Steel One-Piece Louver Assembly
  • Magnetic Snap-In EZ-Clean Door Gasket(s)
  • Automatically Activated Incandescent Lights
  • Thermostatic Expansion Valve Metering Device
  • Automatic Non-Electric Condensate Evaporator
  • INTELA-TRAUL® Microprocessor Control System
  • Full or Half Length Stainless Steel Doors With Locks
  • Controllable Anti-Condensate Door Perimeter Heaters
  • Set of Four (4) 6" High Adjustable Stainless Steel Legs
  • Guaranteed For Life Horizontal Work Flow Door Handle
  • Self-Closing Doors With Stay Open Feature At 120 Degrees
  • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior
  • Balanced, Self-Contained Refrigeration System Using R-404A
  • Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory)
  • Standard Door Hinging: 132W = Right, 232W = Left/Right, 332W = Left/Right/Right (other hingings available)
Options & Accessories:
  • Bare Tube Coil (132W & 232W only)
  • EZ-Open Foot Pedal (full height doors only)
  • Optional 220/50/1 or 208/115/60/1 Voltages
  • Optional 208/115/60/1 or 220/50/1 Voltages
  • Stainless Steel Finished Back With Rear Louvers
  • Remote Monitoring (monitoring supplied by E-Control)
  • Set of Four (4) 4-5/8" or 6" High Casters In Lieu of Legs
  • Remote Applications (see form TR35837 for more details)
  • Remote Applications (see form TR35837 for more details)
  • Additional Wire Shelves or Optional Stainless Steel Shelves
  • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Pans
  • Other Support Options: 4-1/2" High Base or 6" High Kickplate
  • Water Cooled Self-Contained Condenser Suitable for Connection To Glycol
  • No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans
  • EZ-Change Interiors (#1, universals, universal heavy duty tray slides and shelves)
  • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans
Specifications:
Construction, Hardware and Insulation 
  • Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Anti condensate heaters are located behind each door opening. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Refrigeration System 
  • A top mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 0 to -5°F (all models are -10 degree F capable in up to 100 degree ambient. 
Controller 
  • The easy-to-use water-resistant INTELA-TRAUL® microprocessor control system is supplied standard. RS485 data port enables data communications for remote monitoring such as NAFEM Data Protocol, E-Control Systems® and others. It includes a 3-Digit LED Display and Fahrenheit or Celsius Temperature Scale Display Capability, In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption. 
Interior 
  • Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Standard interior arrangements are installed at the factory and EZ-Change interior slides (only) are field installed. 
Warranties 
  • Both a three-year parts and labor warranty and a five-year compressor warranty (self-contained models only) are provided standard. 

Options for Traulsen ALT332WUT-HHS

Locking devices
Glycol system option
Correctional options
Options & accessories
Mounting options
What is included
  • Degrees modification: 0 degrees Fahrenheit holding temperature, standard
  • Warranty: 6-year parts & labor and 7 year compressor, standard. Visit www.traulsen.com for details
  • Oversized note: Oversized units with crated shipping dimensions greater or equal to 72" in length and/or 90" in height. If delivery is to a facility without a standard height dock, additional shipping charges will apply, depending on the service requested (consult factory for details)
Door hinging

Features
Construction, Hardware and Insulation: Cabinet exterior front, one piece sides, louver assembly and doors are constructed of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel legs are included. Doors are equipped with a gasket protecting metal door pan, removable plug cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Hinges include a concealed switch to automatically activate the interior incandescent lighting. Guaranteed for life, work flow door handles are mounted horizontally over recess in door which limits protrusion from door face into aisleways. Doors have seamless, polished metal corners. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Anti condensate heaters are located behind each door opening. Both the cabinet and door(s) are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Warranties: Both a three year parts and labor warranty and a five year compressor warranty (self-contained models only) are provided standard.
Standard Product Features: • R-Series: Stainless Steel Exterior & Interior • A-Series: Stainless Steel Exterior/Anodized Aluminum Interior • INTELA-TRAUL® Microprocessor Control System • Balanced, Self-Contained Refrigeration System Using R-404A • -10°F Capable • Scroll Blower Type Evaporator Fan • Biased Return Air Duct • Full or Half Length Stainless Steel Doors With Locks • Self-Closing Doors With Stay Open Feature At 120 Degrees • Guaranteed For Life Cam-Lift Hinges • Guaranteed For Life Horizontal Work Flow Door Handle • Standard Door Hinging: 132W = Right, 232W = Left/Right, 332W = Left/Right/Right (other hingings available) • Automatically Activated Incandescent Lights • Stainless Steel Breaker Caps • Three Adjustable Wire Shelves Per Section, Supported On Shelf Pins (installed at the factory) • Automatic Non-Electric Condensate Evaporator • Magnetic Snap-In EZ-Clean Door Gasket(s) • Gasket-Protecting Metal Door Liner • Controllable Anti-Condensate Door Perimeter Heaters • Thermostatic Expansion Valve Metering Device • Stainless Steel One-Piece Louver Assembly • 9' Cord & Plug Attached • Set of Four (4) 6" High Adjustable Stainless Steel Legs • Three Year Parts And Labor Warranty • Five Year Compressor Warranty
Controller: The easy to use water resistant INTELA-TRAUL® microprocessor control system is supplied standard. RS485 data port enables data communications for remote monitoring such as NAFEM Data Protocol, E-Control Systems® and others. It includes a 3-Digit LED Display and Fahrenheit or Celsius Temperature Scale Display Capability, In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption.
Options & Accessories: • Stainless Steel Finished Back With Rear Louvers • No. 1 Type Tray Slides To Accommodate either (1) 18" x 26" or (2) 14" x 18" Pans • No. 4 Type Tray Slides To Accommodate (1) 18" x 26" Pans • Universal Type Tray Slides To Accommodate Either (1) 18" x 26" or (2) 14" x 18", or (2) 12" x 20" Pans • Additional Wire Shelves or Optional Stainless Steel Shelves • EZ-Change Interiors (#1, universals, universal heavy duty tray slides and shelves) • EZ-Open Foot Pedal (full height doors only) • Bare Tube Coil (132W & 232W only) • Optional 220/50/1 or 208/115/60/1 Voltages • Set of Four (4) 4-5/8" or 6" High Casters In Lieu of Legs • Other Support Options: 4-1/2" High Base or 6" High Kickplate • Remote Applications (see form TR35837 for more details) • Optional 208/115/60/1 or 220/50/1 Voltages • Remote Applications (see form TR35837 for more details) • Water Cooled Self-Contained Condenser Suitable for Connection To Glycol • Remote Monitoring (monitoring supplied by E-Control)
Refrigeration System: A top mounted, self-contained, balanced refrigeration system using R-404A refrigerant is conveniently located behind the one piece louver assembly. It features an easy to clean front facing condenser, thermostatic expansion valve, air-cooled hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil located outside the food zone and a top mounted non-electric condensate evaporator. Biased return air duct protects against introduction of warm kitchen air, promoting even temperature maintenance and efficient operation. A 9' cord and plug is provided. Standard operating temperature is 0 to -5°F (all models are -10 degree F capable in up to 100 degree ambient.
Interior: Standard interior arrangements include three (3) wire shelves per section, mounted on shelf pins. Shelves are full-width, and do not have any large gaps between them requiring the use of "bridge" or "junior shelves." Recommended load limit per shelf should not exceed 225 lbs. Standard interior arrangements are installed at the factory and EZ-Change interior slides (only) are field installed.

Traulsen ALT332WUT-HHS Parts

All Traulsen ALT332WUT-HHS Parts

Traulsen ALT332WUT-HHS Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Traulsen ALT332WUT-HHS to Other Products

Rating
Price
Width (in)
Depth (in)
Height (in)
Freezer Capacity
Compressor Location
Refrigerant Type
Sections
Number of Doors
Door Type
Half Doors
Hinge Location
Rating
 
Price
$32,241.33 $30,775.82
86.13
35
83.25
79 cu. ft.
Top Mounted
R-404A
3
6
Solid
Yes
Left/Right
Rating
 
Price
$31,856.72 $30,408.68
76.31
35
83.25
69.5 cu. ft.
Top Mounted
R-404A
3
6
Solid
Yes
Left/Right
Rating
 
Price
$31,851.77 $30,403.96
76.31
35
83.25
69.5 cu. ft.
Top Mounted
R-404A
3
3
Solid
No
Left/Right
Rating
 
Price
$32,751.68 $31,262.96
76.31
35
83.25
69.5 cu. ft.
Top Mounted
R-404A
3
6
Solid
Yes
Left/Right
Rating
 
Price
$31,343.90 $29,919.17
86.13
35
83.25
79 cu. ft.
Top Mounted
R-404A
3
6
Solid
Yes
Left/Right
Rating
 
Price
$31,341.42 $29,916.81
86.13
35
83.25
79 cu. ft.
Top Mounted
R-404A
3
3
Solid
No
Left/Right

Items Related to Traulsen ALT332WUT-HHS

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Traulsen ALT332WUT-HHS 86.13'' 79.0 cu. ft. Top Mounted 3 Section Solid Half Door Reach-In Freezer
ALT332WUT-HHS 86.13'' 79.0 cu. ft. Top Mounted 3 Section Solid Half Door Reach-In Freezer
$32,241.33