Advance Tabco SAG-MT-302 Mixer/Slicer Equipment Stand, 18 Gauge Type 430 Stainess Steel Top with Undershelf and without Backsplash - 24"W x 24"H x 30"D

Name: Advance Tabco SAG-MT-302 Mixer/Slicer Equipment Stand, 18 Gauge Type 430 Stainess Steel Top with Undershelf and without Backsplash - 24"W x 24"H x 30"D
Brand: Advance Tabco
SKU: SAG-MT-302
Price: 746.13 USD
Availability: InStock

MPN#: SAG-MT-302

Advance Tabco Advance Tabco SAG-MT-302 Mixer/Slicer Equipment Stand, 18 Gauge Type 430 Stainess Steel Top with Undershelf and without Backsplash - 24"W x 24"H x 30"D

Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).

Advance Tabco SAG-MT-302 Accessories

Advance Tabco TA-33 Special working height (per table)

$69.19

Advance Tabco TA-3 Upgrade table understructure to stainless steel (per linear foot)

$38.80

Advance Tabco TA-41 Cutting Board

$64.52

Advance Tabco TA-62C GFI Duplex Electrical Outlet

$329.59

Advance Tabco TA-62D Duplex Electrical Outlet with GFI

$350.16

Advance Tabco TA-622 Data Port Receptacle under top

$297.80

Advance Tabco TA-112 Electric outlet

$404.86

Advance Tabco TA-20 Leg

$48.62

Advance Tabco TA-19 Flanged Bullet Foot

$39.74

Advance Tabco TA-21 Bullet foot

$19.17

Advance Tabco TA-23 Welded Set Up Table/Shell Crating (per table)

$275.36

Advance Tabco TA-25ES Casters

$291.72

Advance Tabco TA-255 Casters

$388.49

Advance Tabco TA-37 Enclosed Base

$249.65

Advance Tabco TA-48 12"" x 12"" cut out for plumbing in back panel or undershelf

$165.50

Advance Tabco TA-72 Leg to wall clamp

$213.65

Advance Tabco TA-92 Apron in front of sink

$116.41

Advance Tabco TA-92A Apron with lever drain support holes

$174.38

Advance Tabco TA-94 16 gauge 304 series stainless steel undershelf upgrade (per linear foot)

$36.93

Advance Tabco TA-95 16 gauge 304 series stainless steel leg upgrade (per table)

$90.70

Advance Tabco TA-61 Modification to reduce length and/or width of table start with next largest size then add "TA-61" to model number (nc)

Call for price

Advance Tabco TA-62F Junction Box (empty) below table top

$152.62

Advance Tabco 9-SS-2 Corner Bumpers

$156.61

Advance Tabco TA-94A 14 gauge 304 stainless steel undershelf upgrade

$44.63

Advance Tabco TA-76 Paint on sound deadening under top (supplements standard sound deadening under support channels) (each)

$366.05

Advance Tabco TA-106 Mirror Highlight work table upgrade

$285.18

Advance Tabco TA-366A Reinforced understructure under table top (maximum recommended load 75 lbs per sq. ft. evenly distributed weight) (each)

$228.61

Advance Tabco TA-9 Rear splash

$28.99

Advance Tabco TA-24 Shell Crated (per table)

$203.36

Advance Tabco TA-366 Reinforced understructure for undershelves (maximum recommended load 30 lbs per sq. ft. evenly distributed weight) (each)

$228.61

Advance Tabco TA-63 Removable Shelving

$271.15

Advance Tabco TA-23A Table legs welded to leg gussets under table top

$347.18

Advance Tabco TA-17 Upgrade undershelf to have marine edge (also

$301.67

Description

Advance Tabco SAG-MT-302 Description

Equipment Stand, 24"W x 30"D x 24"H, 430 stainless steel top, 18 gauge adjustable undershelf, stainless steel legs, adjustable stainless steel bullet feet, NSF

Q & A

Certifications

Advance Tabco SAG-MT-302 Certifications

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

Advance Tabco Advance Tabco SAG-MT-302 Mixer/Slicer Equipment Stand, 18 Gauge Type 430 Stainess Steel Top with Undershelf and without Backsplash - 24"W x 24"H x 30"D

Advance Tabco SAG-MT-302 Specifications

Size	24"W x 24"H x 30"D
Backsplash Modifications	without Backsplash
Brand	Advance Tabco
Made in	USA
Certifications	NSF
Undershelf Construction	Stainless Steel
Leg Construction	Stainless Steel
Stainless Steel Type	Type 430
Table Style	Undershelf
Undershelf	Yes
Gauge	18 Gauge
Backsplash	No
Material	Stainless Steel
Width (in)	24
Height (in)	24
Depth (in)	30
Weight	41