Beverage Air SPED48HC-10-2 48'' 1 Door 2 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Standard Top
Calculate
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air SPED48HC-10-2 Specifications
| Nominal Width | 48 Inches |
|---|---|
| Access Type | Doors and Drawers |
| Compressor Style | Side / Rear Breathing |
| Top Type | Standard Top |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Number of Doors | 1 |
| Made in | USA |
| Certifications | cULus |
| Capacity | 12 - 18 cu. ft. |
| Number of Drawers | 2 |
| Sections | 2 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 48 |
| Height (in) | 45.25 |
| Depth (in) | 32 |
| Weight | 326.00 |
Additional Information on Beverage Air SPED48HC-10-2
warranty-sheet.pdf 
pan-configurations.pdf 
diagram.pdf 
warranty-update.pdf 
beverage-air-sped48hc-10-2.specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air SPED48HC-10-2 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air SPED48HC-10-2 Description
If you're looking for a mid-size refrigerated prep table then the SPED48HC-10-2 Elite Series™ Sandwich Top Refrigerated Counter from Beverage Air is an obvious choice. Below the worktop, the two drawers and reach-in section provide a total of 13.01 cu. ft. of refrigerated space. Pans up to 6" deep can be stored in the drawers for more versatility.
The reach-in cabinet has two epoxy-coated steel wire shelves to make the best use of the space. The liner is made from corrosion-resistant aluminum that is easy to clean and maintain. The stainless steel door locks in the cold air with snap-in gaskets that can be removed easily for maintenance or cleaning. The interior is kept nice and cold by enhanced airflow which keeps the temperature between 36º and 38ºF.
The drawers feature slides with a locking mechanism to prevent them from being pulled out of the cabinet accidentally. Stainless steel frames are used to support the telescoping drawer slides for effortless access to ingredients. The temperature inside the drawers is constantly maintained between 36º and 38ºF to maximize the shelf life of stored food.
At the bottom of the unit is the refrigeration system, this bottom-mounted design saves space and provides efficient cooling. The self-contained refrigeration system has a ¼ HP compressor that provides 1094 BTU/hr of cooling with hydrocarbon-based R290 refrigerant which is compliant to all modern environmental codes. The refrigeration system features full electronic control to efficiently control the temperature and a condensate evaporator that eliminates the need for a floor drain.
This unit is configured to use standard 115v/60/1-ph power at 2.2 amps. An 8’ power cable with an integrated NEMA 5-15P plug comes standard.
Beverage Air SPED48HC-10-2 Accessories
Beverage Air SPED48HC-10-2 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Beverage Air SPED48HC-10-2 to Other Products
Items Related to Beverage Air SPED48HC-10-2
