Beverage Air SPED72HC-08C-6 72'' 6 Drawer Counter Height Refrigerated Sandwich / Salad Prep Table with Cutting Top
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
- 2025 model, meets the newest EPA and DOE codes.
Beverage Air SPED72HC-08C-6 Accessories
Description
Beverage Air SPED72HC-08C-6 Description
Sandwich Top Refrigerated Counter, three-section, 72"W, 20.0 cu. ft. capacity, (6) drawers (upper & lower pull-out drawers accommodate 6" deep pans), stainless steel top with opening for (8) 1/6 size pans (pans furnished are 4" deep, tops will accommodate 6" deep pans), 17" polyethylene cutting board, stainless steel exterior with galvanized steel back & bottom, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-SanitationThe Beverage Air SPED72HC-08C-6 Elite Series™ Sandwich Top Refrigerated Counter is a prep table configured with six refrigerated drawers for convenient storage of larger items while eight 1/6 pans on the countertop provide easy access for effortless sandwich or salad prep work. The refrigerated undercounter drawers offer 20.0 cu. ft. of easy-to-reach storage.
Sandwich ingredients and condiments are kept crisp and fresh between 41°F and 33°F inside a cold bunker that is easy to access through its stainless steel lid and hood assembly. The cutting board is extra deep at 17” allowing for more space for prepping more ingredients or assembling sandwiches or salads. The cutting board is secure, so there are no worries of it sliding out, but it can be easily removed for cleaning. Since the chilled pan storage does not run the whole width of the worktop, there is additional space for sauces and ingredients that don’t need to be refrigerated.
The easy to access drawers have slides featuring a locking mechanism that prevents them from being completely pulled out accidentally. For effortless access to ingredients, stainless steel frames support the telescoping drawer slides. The temperature inside the drawers is constantly maintained between 36º and 38ºF to maximize the shelf life of stored food.
A ⅓ HP compressor at the bottom of the unit provides 1549 BTU/hr of cooling capacity. Environmentally-friendly R290 refrigerant is used to provide efficient and safe refrigeration. This hydrocarbon refrigerant meets all environmental regulations. A non-electric automatic defrosting cycle eliminates downtime and labor costs.
This unit is configured to use standard 115v/60/1-ph power at 5.4 amps. An 8’ power cable with an integrated NEMA 5-15P plug comes standard.
Options
Q & A
Beverage Air SPED72HC-08C-6 Specifications
| Nominal Width | 72 Inches |
|---|---|
| Top Type | Cutting Top |
| Access Type | Drawers |
| Compressor Style | Side / Rear Breathing |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Certifications | cULus, UL, UL EPH, UL EPH Classified, UL-Sanitation |
| Capacity | 19 - 32 cu. ft. |
| Number of Drawers | 6 |
| Sections | 3 |
| Style | Counter Height |
| Voltage | 115 Volts |
| Width (in) | 72 |
| Height (in) | 45.13 |
| Depth (in) | 38.38 |
| Weight | 456 |
Additional Information on Beverage Air SPED72HC-08C-6
Beverage Air SPED72HC-08C-6 Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Compare Beverage Air SPED72HC-08C-6 to Other Products
Items Related to Beverage Air SPED72HC-08C-6
