Delfield DIS-1450-QT Heated Drop-In Dish Dispenser for 12" to 14 1/2" Dishes

If you want dinner and lunch plates dishware heated and dispensed fast, the DIS-1450-QT drop-in quick-temp heated dish dispenser for 12" to 14.5" diameter plates is the unit you’re looking for. Designed to fit in existing 28" tall spaces in your kitchen or front-of-the-house, this dish dispenser has a maximum capacity of 72 dishes or 24" stack height. A 700-watt convection heating element uses a fan motor to quickly distribute heat around the plates and maintain the temperature inside the dispensing tube at 150°F–170°F. 

This tube has a stainless steel outer jacket to protect plates and add much-needed durability to get through tougher foodservice environments. The vertical side channels, bottom brace, and top flange are all stainless steel and are integrally welded together to provide stable weight support for your plates. The dish carrier head adds plate protection and versatility with its stainless steel welded rods and removable plate. 

The dispenser tube can be easily switched on and off, and even includes a built-in thermostat for easy temperature control. The self-leveling mechanism ensures you always have a warm plate accessible while the three (3) high-impact flange guideposts ensure the stack stays in place to avoid breakage and damage when being transported around the restaurant. You can easily find the right height for the stored plates using the stainless steel spring supports.

This Delfield drop-in quick-temp dish dispenser comes with cUL, UL, and NSF certifications. It is rated at  5.5 amps and requires a 120/60/1 electrical connection. 4' (2.7m) cord with NEMA 5-15P plug supplied. Enjoy a one-year parts warranty and a 90-day labor standard warranty.

Get the best food holding and warming equipment at the best prices only here at CKitchen!

• Spring supports to be stainless steel
• High impact plastic guide posts mounted to flange
• One year parts and 90 day labor standard warranty
• Flange, channels and bottom to be integrally welded
• Carrier head made of welded rods with a removable top plate
• Top flange, bottom brace and vertical side channels are stainless steel
• Self-leveling mechanism, field adjustable by adding or removing springs
• DIS-ET/QT Series Only
  • 4’ cord and plug
  • Filtered air intake
  • Outer stainless steel jacket
  • QT- Shall have a stainless steel cover
  • On/off switch and adjustable thermostat
  • Convection heating module and fan motor
  • ET temperature range is 120-140°F (49-60°C)
  • QT temperature range is 150-170°F (66-77°C)

• Special voltages
• Hold-down rod for dispenser tubes
• Shorten dispenser tubes to special length
• Stainless steel tube cover (500-725 sizes only)
• Stainless steel outer jacket for dispenser tubes-non-heated (standard on ET or QT)
• Non-marring adjustment rods for oval dishes and various dish diameters (813–1450 sizes only)
• Stainless steel dome cover with access to dishes (813-1450 sizes only; standard on QT models)
• 12.00” (30cm) dia. stainless steel dish dispenser tray (DIS-1200, DIS-1200-ET and DIS-1200-QT only)