Description
Duke TST-18SS Description Thurmaduke™ Solid Top Unit, utility counter, 18"W x 32"D x 36"H, 16ga stainless steel top, 20ga stainless steel body & undershelves, 6"H stainless steel legs with adjustable feet (casters prohibited due to tipping), NSF
Close Description Options
Options for Duke TST-18SS Tray Slide - Customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$340.20
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$386.10
Tray Slide - Operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$340.20
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$386.10
Fabrication, electrical & special body modifications Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$179.10
Bumpers (3" x 3" rubber corners) (per set) +$152.10
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$72.90
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$180.00
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$558.00
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$171.90
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$271.80
Omission of shelves, open base +$801.00
Special Height Body, per unit
For special width body…per unit +$351.00
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$351.00
L-shaped counters - inside or outside corner formed by lapping standard units +$538.20
Pedestal-type duplex outlet, mounted, not wired +$393.30
Pedestal-type duplex outlet, mounted, wired to existing power source +$534.60
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$730.80
For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$351.00
For pass-thru construction +$351.00
Kickplates Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$145.80
Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$156.60
Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$145.80
Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$156.60
Doors Single door, no lock, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$625.50
Single door, with lock & keys, left hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$705.60
Single door, no lock, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$625.50
Single door, with lock & keys, right hand hinge, stainless steel, magnetic catch, recessed stainless steel pull +$705.60
Close Options Duke Duke TST-18SS Thurmaduke™ Solid Top Unit 
