Glastender TSB-60-S Underbar Sink Unit, 3 Compartment, Stainless Steel, with 7"H backsplash and 2 Drainboards / Faucet Included - 60"W x 24"D
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Glastender TSB-60-S Accessories
Description
Glastender TSB-60-S Description
The Glastender TSB-60-S Underbar Sink Unit is a three-compartment sink with two integral drainboards on either side. This unit is excellent for washing glassware in an efficient fashion. If your establishment is planning on having an automatic glasswasher, some locales still require you to have a three basin sink. This unit can easily be installed with a removable sink cover to provide extra glass storage or workspace while still abiding by the local regulations.
The front rail, top, and backsplash are made from a single piece of seamless 18 gauge stainless steel. This makes for a worktop which isn’t only durable but extremely easy to clean and it will surely maintain its appearance for many years. The 12” wide removable drainboard panels on either side are made from perforated 20 gauge stainless steel for easy maintenance. The perforations in the drainboard allow for better airflow to the inside of glassware which promotes faster drying. Glastender's Underbar Sinks are manufactured for durability.
The faucet on this model is deck mounted and uses hot and cold ⅜” sink leads. Each sink bowl is 14” front-to-back, 11” wide, and 10-¼” deep and feature overflow standpipes. The sink bowls are made from extremely durable 16 gauge steel. This sink unit is connected to drainage through a 1-½” I.P.S. threaded drain.
The main body of this unit, including the sides, front, back, and bottom are made from 20 gauge stainless steel. The main worktop is 30” from the floor making it a perfect fit with other Glastender underbar equipment. Including the backsplash, this unit is 37” tall, 24” front-to-back, and 60” in width. The unit is supported by 16” long 16 gauge stainless steel legs that are 1-⅝” in diameter. Keeping the unit level is simple with four adjustable bullet feet made from stainless steel.
The Glastender TSB-60-S Underbar Sink Unit is ETL-Sanitation certified and meets NSF/ANSI 61, Annex, G standards.
Standard Features:
- Faucets are standard and ship mounted
- One over-flow tube per sink bowl included
- 16 gauge stainless steel fabricated sink bowls
- 19″ deep models have a backsplash mounted faucet
- Extra wide sink bowl easily accommodates brush washer
- All stainless steel construction & stainless steel bullet feet
- 11″ by 14″ by 10-1/4″ deep sink bowl with hot and cold water faucet
- Perforated stainless steel inserts are available to cover sinks when not in use
- Integral drainboards have lift-out stainless steel perforated insert for better air circulation
- 18 gauge stainless steel one-piece seamless top, front rail and backsplash featuring 1/4″ radius corners for easy cleaning
Options
Q & A
Glastender TSB-60-S Specifications
| Number of Drainboards | 2 Drainboards |
|---|---|
| Number of Bowls | 3 |
| Backsplash Modifications | 7"H Backsplash |
| Type | Bar Sinks |
| Installation Type | Freestanding |
| Brand | Glastender |
| Certifications | ETL, ETL-Sanitation |
| Number of Compartments | 3 |
| Faucet | Faucet Included |
| Material | Stainless Steel |
| Width (in) | 60 |
| Height (in) | 37 |
| Depth (in) | 24 |
| Weight | 130.00 |
Additional Information on Glastender TSB-60-S
Glastender TSB-60-S Certifications
ETL
The ETL Mark is proof of product compliance to North American safety standards.
ETL-Sanitation
This item meets the sanitation standards imposed by the ETL, a division of the Intertek Group.
