Groen FT-20 Tri-Leg Base 2/3 Jacketed Stationary Direct Steam Kettle - 20 Gallon Capacity

Kettle, direct steam, 20-gallon capacity, 2/3 jacket, 316 stainless steel liner, 2" TDO, 1/4" perforated strainer, tri-leg open base, stainless steel construction, flanged feet, hinged cover, 25 PSI

Direct Steam Kettle, 20-gallon capacity, 2/3 jacket, 316 stainless steel liner, 2" TDO, 1/4" perforated strainer, tri-leg open base, stainless steel construction, flanged feet, hinged cover, 25 PSI

• Kettle is type 316 stainless steel, with solid one-piece welded construction. Unit shall be provided with a heavy, durable bar rim with a continuous seal weld on the underside to ensure maximum durability and sanitation. Unit provided with faucet bracket as standard. 

• Interior of kettle is polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance. 

• Unit was be ASME shop-inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 25 PSI. 

• Unit was designed and constructed to be NSF-listed, meeting NSF and all known health department and sanitation codes. 

• Unit have a 2” sanitary tangent draw-off which is a 316 stainless steel compression disc drain valve, for easy disassembly without tools. Larger 3” draw-off available. The drain outlet shall be equipped with a removable 1/4” perforated stainless steel strainer. 

• Cover is one piece stainless steel dome shaped and hinged. Counterbalanced #51 spring assisted cover for 60, 80, 100, 125 and 150 gallon units. 

• Kettle operate dependably at any steam pressure between 5 and 25 PSI. Higher working pressures available. 

• Unit was mounted on an all stainless steel, tubular legs, continuously welded to kettle, with stainless steel adjustable floor flanges. Floor flanges and mounting bolts shall be provided with sanitary covers. 

• Remote steam source required. Steam trap assembly is required and not provided unless ordered as an option. See dimension L on other side for steam inlet size and number. 

• Designed and manufactured in the United States.

• Kettle brush kit
• Water fill faucets
• Steam regulators
• Solid disc strainer
• 3” tangent drawoff
• Cold water cooling
• Gallon etch marks
• Steam trap assemblies
• Basket inserts (TRI-BC)
• Contour measuring strip
• Higher working pressure
• 1/8” perforated disc strainer
• 1/4” perforated disk strainer