Hatco C-24-208-3-QS (QUICK SHIP MODEL) Compact 6 gallon Electric Booster Heater
MPN#: C-24-208-3-QS
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Hatco C-24-208-3-QS Accessories
Description
Hatco C-24-208-3-QS Description
(QUICK SHIP MODEL) Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 24-kW, stainless steel front panel, powder-coated silver-gray hammertone body, 6" plastic non-adjustable legs, Castone® lined tank, 208v/60/3-ph, NSF, cULu(QUICK SHIP MODEL) Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 24-KW, stainless steel front panel, powder-coated silver-gray hammertone body, Castone tank, 6" legs, 208v/60/3-ph, NSF, cUL, ULStandard Features:
The Hatco Compact Electric Booster Water Heater provides all the 180°F (82°C) final rinse water required to sanitize and flash-dry dishes and flatware. The space saving Compact is easy to install next to the dishwasher with slide brackets or on 6" (152 mm) legs. The storage capacity is 6 gallons (23 liters).
- Each booster has fiberglass insulation to minimize heat loss
- Available with slide brackets for mounting under a dish-table
- All models include a Castone® lined tank with a 10-year limited warranty
- A stainless steel front panel and powder-coated silver-gray hammertone body is standard on all Compact models
- Hatco electric booster heaters are factory pre-plumbed and pre-wired with calibrated immersion thermostat and high-temperature limit switch
- Swing-away front panels with low-water cut-off, control fuses and transformer allow quick access to probes and elements for easier serviceability
- Features include a temperature/pressure relief valve, a pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, pilot indicator light, on-off switch, and a low-water cut-off to prevent element burnout due to a low water condition
Options: (Available at time of purchase only)
- Stainless steel body and base
- Security package (Torx screws and control cover)
Accessories:
- Additional slide brackets
- Back pressure relief valve
- Shock absorber (reduces water hammer)
- Additional stainless steel floor mounting leg assembly
- Additional brass pressure reducing valve with by-pass
- Blended Phosphate injection system (not for potable water)
- Additional stainless steel adjustable legs 6" - 7" (152 - 178 mm)
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Certifications
Hatco C-24-208-3-QS Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Hatco C-24-208-3-QS Specifications
| Model | (QUICK SHIP MODEL) |
|---|---|
| Phase | 3 Phase |
| Type | Compact |
| Brand | Hatco |
| Made in | USA |
| Operation | Electric |
| Certifications | NSF |
| Capacity | 6 gallons |
| Heat | Electric |
| Material | Stainless Steel |
| Voltage | 208 Volts |
| Wattage | 24 kW |
| Width (in) | 18 |
| Height (in) | 18 |
| Depth (in) | 24 |
| Weight | 142.00 |
Additional Information on Hatco C-24-208-3-QS
Free Freight?
Quick Ship
$3,817.55
Product Protection
Starting at
