John Boos 3BCS-184-2D18-X "B" Series Corner Sink
MPN#: 3BCS-184-2D18-X
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
John Boos 3BCS-184-2D18-X Accessories
John Boos PRW15-X Pot Rack
$394.91
John Boos PRW14-X Pot Rack
$356.53
John Boos PRW13-X Pot Rack
$189.88
John Boos PRW12-X Pot Rack
$156.55
John Boos PRW11-X Pot Rack
$139.38
John Boos PRW21-X Pot Rack
$345.42
John Boos PRW22-X Pot Rack
$387.84
John Boos PRW23-X Pot Rack
$434.30
John Boos PRW24-X Pot Rack
$564.59
John Boos PRW25-X Pot Rack
$773.66
Description
John Boos 3BCS-184-2D18-X Description
"B" Series Corner Sink, 3-compartment, 58-1/4"W x 58-1/2"D x 44"H overall size, (3) 18"W x 18" front-to-back x 14" deep compartments, (2) 18" left & right drainboards, 10"H boxed backsplash with 45° top and 2" return, (2) sets of splash mount faucet holes with 8" centers, coved corners at 3/4" radius, 3-1/2" die-stamped drain opening, 16/300 stainless steel, stainless steel legs, adjustable bracing, & gussets, adjustable stainless steel bullet feet, NSF (Available in Effingham and Nevada)
Standard Features:
- 16ga Stainless Steel
- 1 1/8" Faucet Holes in Backsplash
- 8" O.C Faucet Holes in Backsplash
- 14" Deep Three Compartment Sink Bowls
- Standard Stainless Steel Legs 1-5/8" Diameter
- Type 300 Stainless Steel With #4 Polish, Satin Finish
- All Corners, both Vertical and Horizontal, Coved at 3/4" Radius
- All Outside Corners of Assembly are Bullnosed to Provide Safe, Clean, and Polished Edge
- Bottoms of Commercial Sink Bowls Formed for Drainage to 3-1/2" Diameter Die Stamped Opening
- Full Length 9 3/4" High Boxed Backsplash, with 2" Return to Wall at 45 Degree & 1" Turned Down Rear Lip
- Note: More Restaurant Equipment, Compartment Sinks & Underbar Sinks are available
Construction
- Base: Stainless Steel Frame are MIG Welded
- Top: Stainless Steel Sinks are TIG Welded, Exposed welds are Polished to Match Adjacent Surface
Material
- Gussets: Stainless Steel
- Bracing: 1-1/4" Round O.D. Stainless Steel
- Feet: 1" Adjustable Stainless Steel Bullet Feet
- Legs: 1-5/8" Round O.D. Galvanized Stainless Steel
- Bowls & Top: 16ga Type 300 Stainless Steel with #4 Polish, Satin Finish
Q & A
Certifications
John Boos 3BCS-184-2D18-X Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
John Boos 3BCS-184-2D18-X Specifications
| Brand | John Boos |
|---|---|
| Gauge | 16 Gauge |
| Number of Drainboards | 2 |
| Type | Corner Sinks |
| Certifications | NSF |
| Number of Compartments | 3 |
| Width (in) | 58.25 |
| Height (in) | 446 |
| Depth (in) | 23.50 |
| Weight | 58.25 |
Additional Information on John Boos 3BCS-184-2D18-X
Free Freight?
Quick Ship
$1,835.17
Product Protection
Starting at
