I am interested in the Perlick DDS84 Direct draw beer dispenser. I had two questions. 1. Do you sell tower kits that work with this cooler and if so would they work if I wanted to instal a countertop between the cooler and the tap. 2. are the holes for the tap precut in a specific location or is that something I need to do?

Name: Perlick Corporation DDS84 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 4 Kegs Capacity
Brand: Perlick
SKU: dds84
Price: 6461.95 USD
Availability: InStock

Yes we do sell them. They can pre drill the holes upon ordering or you can drill yourself you would need to match counter box holes.

Perlick Corporation DDS84 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 4 Kegs Capacity

MPN#: DDS84

Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).

Perlick Corporation DDS84 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 4 Kegs Capacity

Perlick DDS84 Accessories

Description

Perlick DDS84 Description

Direct Draw Draft Dispenser, three-section, 84"W, self-contained refrigeration, holds (4) half barrels (LESS TAPPING), 33-40°F temperature range, (3) solid doors, digital thermostat, front vented, automatic defrost & evaporator condensate, automatic defrost & condensate evaporator, includes floor drain, 1/4 HP, R290 Hydrocarbon refrigerant, NSF, cULus

Options for Perlick DDS84

Condensing Unit Location

Condensing unit location: Left

Condensing unit location: Right

Exterior finish

Black exterior finish

Stainless steel exterior finish

Specify exterior finish

What is included

CA PROP 65: WARNING: The materials used in this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Voltage: 120v/60/1-ph, 4.2 amps, NEMA 5-15P

Q & A

I am interested in the Perlick DDS84 Direct draw beer dispenser. I had two questions. 1. Do you sell tower kits that work with this cooler and if so would they work if I wanted to instal a countertop between the cooler and the tap. 2. are the holes for the tap precut in a specific location or is that something I need to do?: Yes we do sell them. They can pre drill the holes upon ordering or you can drill yourself you would need to match counter box holes. CKitchen Customer Solutions

Certifications