Traulsen TE072HT Spec-Line 72" 4 Drawer Refrigerated Chef Base with Marine Edge Top

Standard Features:

Traulsen's TE Series refrigerated equipment stands are intended for use with griddles where cabinet strength and system performance really matter. Their rear-mounted evaporators keep food cold in very warm kitchen environments despite frequent drawer openings. They also offer greater capacity, as each drawer accommodates 6" deep pans, and a variety of other features making them ideal for the equipment stand application. Drawers include a stay open and self-closing feature, as well as a guard to protect the gasket from damage. Grease accumulation on the condenser is prevented by an easy to remove and clean filter. Even installation is facilitated through use of factory-installed casters mounted on an adjustable rail, making it easy to position these around such common floor obstructions as drains, junction boxes, and gas connections.

• Condenser Filter
• Off-Cycle Evaporator Defrost
• Five-Year Compressor Warranty
• Stainless Steel Exterior & Interior
• Three-Year Parts And Labor Warranty
• 14-Gauge Stainless Steel Drawer Slide
• Magnetic Snap-In EZ-Clean Door Gasket(s)
• Self-Closing Drawers With Stay Open Feature
• Full-Length Drawer Handle With Gasket Guard
• Non-Electric Automatic Condensate Evaporator
• NEMA 5-15P Plug With 9' Cord & Cord Retainer
• Stainless Steel Top w/Drip Guard (marine) Edge
• INTELA-TRAUL®  Microprocessor Control System
• 4" Casters On Adjustable Channel Moving System
• Controllable Anti-Condensate Drawer Perimeter Heaters
• Front-Breathing Design For "Zero-Clearance" Installation
• Drawers Accommodate 12" x 20" x 6" Pans (pans by others)
• Balanced, Self-Contained Refrigeration System Using R-404A
• Side, Front & Rear Access Panel For Ease of Service & Maintenance

Options & Accessories:

• Export 220/50/1 Voltage
• System Relocated To Right
• 6" Cabinet Length Extension
• Stainless Steel Exterior Finished Back
• NAFEM Data Protocol Gateway Package
• Set Of 6" High Stainless Steel Legs in Lieu Of Casters
• Remote Applications (see spec TR35837 for more details)
• Water Cooled Self-Contained Condenser Suitable for Connection To Glycol

Specifications:
Construction, Hardware, and Insulation 

• Cabinet exterior front, sides, louver assembly, and drawers are constructed of 20-gauge 430 stainless steel, exterior back and bottom are constructed of heavy-gauge galvanized steel. Cabinet interior sides are constructed of 22-gauge 400 series stainless steel, top and bottom are constructed of 22-gauge 300 series stainless steel. A set of 4" high casters are included standard. Gasket profile and Santoprene® material simplify cleaning and increase overall gasket life. Both the cabinet and drawers are insulated with an average of 2" thick high-density, non-CFC, foamed-in-place polyurethane. 

Controller 

• The easy-to-use water-resistant INTELA-TRAUL® microprocessor control system is supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready. Optional hardware required to be NDP compliant (3rd party software required for network connection). It includes a 3-Digit LED Display, °F or °C Temperature Scale Display Capability, and an RS485 data port. In addition, it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply Interruption. 

Refrigeration System 

• The left side-mounted, self-contained, balanced refrigeration system using R-404Arefrigerant features an off-cycle defrost, capillary tube, air-cooled hermetic compressor, automatic condensate evaporator, and a dedicated rear-mounted evaporator design which distributes cold air through each drawer section. A 9' cord and retainer are provided. Standard operating temperature is 34 to 38°F. 

Drawers 

• Each heavy-duty drawer is designed to accommodate 12" x 20" x 6" deep pans. They are constructed using 14-gauge stainless steel drawer slides and 2" diameter stainless steel rollers. Drawers include both a self-closing and stay-open feature. 

Warranties 

• Both a three-year parts and labor warranty and a five-year compressor warranty (self-contained models only) are provided standard.