Beverage Air DD36HC-1-S 2 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 1 Keg Capacity, 115 Volts

Beverage Air DD36HC-1-S Description

Draft Beer Cooler, 36"W, 51-1/4"H, 8.31 cu. ft., (1) door, (1) 1/2 keg capacity, door locks, one dual faucet column, stainless steel exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

The DD36HC-1-S Draft Beer Cooler from Beverage Air is a durable dispensing unit with a stainless steel finish designed for use in a commercial capacity. 8.31 cu. ft. of refrigerated storage for a single ½ keg.

The door on this unit is self-closing and comes with magnetic gaskets to keep it from being left ajar. It also comes standard with a lock to secure the unit. The walls and ceiling of the interior are made from galvanized steel while the door sill and floor are made from heavy-duty stainless steel. This unit has a stainless steel top with a built-in drip tray to catch spills. The drip tray connects to a drain tube at the bottom of the unit to empty into a floor drain. Beer served from this unit is always nice and cool without too much foam thanks to the insulated 3" stainless steel dispensing tower. 

This unit has a side-mounted self-contained refrigeration system that provides efficient cooling with a ¼ HP compressor that produces 1702 BTU/hr of cooling. The refrigeration system can be on the left or right based on your installation needs. The internal temperature is kept from 36ºF to 38ºF with fully electronic controls. The refrigeration system features an epoxy-coated evaporator for durability and reliability. Environmentally-friendly R290 refrigerant provides efficient cooling while meeting all environmental regulations. Automatic non-electric defrosting makes sure there’s very little downtime while keeping the inside from frosting over.

Connecting this unit to a standard outlet supplying 115v/60/1-ph power at 2.5 amps is simple with the factory-provided 8-foot power cable with a NEMA 5-15P plug set.

Draft Beer Cooler, 36" W, 23-1/2" D, 8.8 cu. ft., (1) door, (1) 1/2 keg capacity, door locks, one dual faucet column, stainless steel exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USA

• Cabinet Construction
  • Field reversible door
  • Full electronic control
  • Self-closing door with lock
  • Magnetic gaskets provide positive door seal
  • 3” Insulated dispensing tower(s) with single draft arm
  • Top is made from heavy-duty stainless steel including drip tray
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1-4 Tap tower
  • 2, 3 & 4 way manifolds
  • Foot pedal door opener
  • 3”-6” casters or 6” black legs
  • Stainless steel interior available