Beverage Air DD48HC-1-B 2 Taps 1/2 Barrel Draft Beer Cooler - Black, 2 Kegs Capacity

Description

Beverage Air DD48HC-B Description

Draft Beer Cooler, 48"W x 30-3/8"D x 49-5/16"H, 15.139 cu. ft., (2) doors, (2) keg capacity, door locks, one dual faucet column, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, 3 amps, NEMA 5-15P, 115v/60/1-ph, cULus, UL EPH Classified

If your establishment needs a reliable beer dispensing platform the DD48HC-1-B Draft Beer Cooler from Beverage Air might be exactly what you’re looking for. The interior has 12.4 cu. ft. of refrigerated space for storing two ½ kegs.

This unit features self-closing doors that come standard with locks for security. The interior walls and ceiling are made from galvanized steel while the floor and door sill are reinforced with durable stainless steel to handle kegs. The 3" stainless steel dispensing tower on this unit is insulated to prevent beer from foaming and makes sure it's nice and frosty. The top is made from durable stainless steel and comes with a built-in drip tray. that connects to a floor drain through internal routing. 

The side-mounted refrigeration unit houses a ¼ HP compressor that produces 1702 BTU/hr of cooling. Depending on your needs, the compressor can be installed on either the right or left side. To make sure the refrigeration system will run reliably for many years the evaporator coil features an epoxy coating. This along with the fully electronic controls make sure the temperature inside stays between 36ºF and 38ºF while drawing as little power as possible. Defrosting is accomplished automatically with a non-electric system to reduce downtime while keeping the interior free of frost. The refrigerant used is R290, an environmentally-friendly hydrocarbon that meets all environmental regulations.

An 8-foot power cable comes from the factory prewired with a NEMA 5-15P plug set for use with standard 115v/60/1-ph power.

Draft Beer Cooler, 48" W, 23-1/2" D, 12.1 cu. ft., (2) doors, (2) keg capacity, door locks, one dual faucet column, black exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, MADE IN USA

• Cabinet Construction
  • Field reversible doors
  • Full electronic control
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top is made from heavy-duty stainless steel including drip tray
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1- 5 Tap tower
  • 2, 3 & 4 way manifolds
  • Foot pedal door opener
  • No draft/hole cover option 
  • Dual tap placement option
  • 3”-6” casters or 6” black legs
  • Stainless steel interior available

Close Description