Cleveland Range KGL80T Kettle

Description

Cleveland Range KGL80T Description

Kettle, gas, tilting, 80-gallon capacity, 2/3 steam jacket design, floor mounted control console supports, 316 series stainless steel interior, flanged feet, 50 psi rating, electronic spark ignition, cover & draw-off optional, 190,000 BTU, CEKettle, gas, tilting, 80-gallon capacity, 2/3 steam jacket design, floor mounted control console supports, stainless steel exterior finish, standard with flanged feet, 50 psi rating, electronic spark ignition, cover & draw-off optional, 190,000 BTU

• Insulated Heat Exchanger
• Automatic Ignition System
• Standard for natural gas operation
• 50 psi Steam Jacket Rating and Safety Valve
• Front mounted combination Pressure/Vacuum Gauge
• Typical approvals include AGA, CSA, CE, NSF and ASME
• Type 304 Stainless Steel with #4 finish on kettle and supports
• Support Legs with level adjustable feet, flanged for floor bolting
• High efficiency Power Burner Heating System (62% to 65% efficiency)
• Standard voltage is 115 volts, 60 Hz, single-phase, supplied with cord and plug
• Solid State Controls, for Temperature and Low Water Safety, in a plug-in Control Module
• Tilt Mechanism of roller bearings and case hardened self-locking worm and segment gear
• Steam Jacket permanently filled with treated, distilled water. Venting and/or refilling not required.
• Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon models, 190M BTU’s on 60 gallon and larger
• Control Panel includes:
  • Power “on/off” Switch
  • L.E.D. Indicators for Heat Cycle and Low Water Warning.
  • Precise, consistent temperature control: less than ± 1°C variance (ideal for simmering).

• Pan Carrier (PCK)
• Flow Diverter (FD)
• Food Strainer (FS)
• Kettle Markings (KM)
• Drain Strainers (DS-)
• Measuring Strip (MS)
• Correctional Package
• Heat Deflector Shield (HS001)
• Faucet Mounting Bracket (FBKT)
• 3" diameter Butterfly Valve (BV3)
• Option for Propane Gas operation
• Automatic Water Meter (GMF or LMF)
• Hot and Cold Water Faucet with Swing Spout (DPK)
• Cooking Baskets and Tri-Basket Supports (BS and TBS)
• Type 316 Stainless Steel Kettle Liner for high acid food products (316)
• Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS-)
• 2˝ or 3" diameter Tangent Draw-Off Valve with Drain Strainer (TD2 or TD3*), *TD3 for 60 and 80 gallon only and will raise height of kettle by 5-5/8" (143mm)
• Kettle Accessory Kit (KAK) includes:
  • 24 oz. Ladle (KL)
  • Clean-up Brush(CB) 
  • Draw-off Brush (DB) 
  • 36” Kettle Whip(KW) 
  • 36” Kettle Brush (KB)
  • 36” Kettle Paddle (KP)

Close Description