Delfield CAB2-1450QT Stainless Steel Enclosed Base 2 Stack Heated Mobile Plate Dish Dispenser for 12" to 14-1/2" Dishes
SKU#: CAB2-1450QT
Call us for price
1-800-555-0666Delfield CAB2-1450QT Specifications
Model | Cabinet |
---|---|
Base Style | Enclosed |
Heat Type | Heated |
Dispenser Type | Platter Dispenser |
Series | ShelleymaticВ® |
Brand | Delfield |
Number of Compartments | 2 |
Heating Element | 700 watt |
Certifications | NSF |
Type | Mobile |
Casters | 4" casters |
Dish Diameter | 12" to 14-1/2" |
Material | Stainless Steel Construction & Plastic Guide Posts |
Voltage | 120 Volts |
Width (in) | 42 |
Height (in) | 36 |
Depth (in) | 21.5 |
Weight | 201 |
Additional Information on Delfield CAB2-1450QT
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield CAB2-1450QT Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Delfield CAB2-1450QT Description
Shelleymatic® Quick Temp Dispenser, Heated Dish, enclosed mobile design, two self-elevating dish dispensing tubes, maximum dish size 14-1/2" diameter, stainless steel cover (per dispenser) & construction, (2) 700 watt heating elements, 4" casters, cUL, UL, NSF (contact factory for price)
Shelleymatic® Quick Temp Dispenser, Heated Dish, enclosed mobile design, two self-elevating dish dispensing tubes, maximum dish size 14-1/2" diameter, stainless steel cover (per dispenser) & construction, (2) 700 watt heating elements, 4" casters, cUL, UL, NSF (more food holding and warming equipment available)
Standard Features:
Standard Features:
- Non-marring gray corner bumpers
- Spring supports to be 14-gauge S/S
- Field adjustable self-leveling mechanism
- (4) 4.00” locking polyolefin swivel casters
- One year parts and 90 day labor warranty
- Cabinet top to be 16-gauge stainless steel
- High impact plastic guide posts mounted to flange
- Outer body and corners to be 20-gauge stainless steel
- Dispenser flange, channels and bottom to be integrally welded
- Carrier head made of welded rods with a removable 18-gauge top plate
- Dispenser top flange, vertical side channels and bottom brace are stainless steel
- Heated, QT & ET Features
- 9’ cord and plug
- Air intake shall be filtered
- On/off switch on each dispenser
- ET maintains 120-140°F (49-60°C)
- QT maintains 150-170°F (66-77°C)
- Adjustable thermostat per dispenser
- QT- stainless steel cover per dispenser
- 22-gauge stainless steel jacket around dispenser
- Convection heating module and fan motor per dispenser
Options & Accessories
- Wrap-around bumpers
- Adjustable height casters
- Four 4” or 5” polyurethane casters
- Hold-down rod for dispenser tubes
- Flange-mount feet in lieu of casters
- Shorten dispenser tubes to special length
- 220 volt, 50/60 cycle, single phase electrical connections
- Stainless steel tube cover (-500 through -725 models only)
- Stainless steel dome cover (-813 through -1450 models only)
- 12” diameter S/S dish dispenser tray (-1200 and -1450 models only)
- Rods for oval dishes and diameter adjustment (-813 through -1450 only)
- Note: Inclusion of these options will alter the electrical specifications of unit Specifications
Specifications
Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels. Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel. Unit shall have four 4.00" (10cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner. Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel. Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate.
Delfield CAB2-1450QT Accessories
Delfield CAB2-1450QT Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Delfield CAB2-1450QT to Other Products
Rating
Price
Material
Base Style
Number of Compartments
Type
Dish Diameter
Price
Call for Price Stainless Steel Construction & Plastic Guide Posts
Enclosed
2
Mobile
12" to 14-1/2"
Price
$1,124.50 Stainless Steel
Enclosed
2
Mobile
8" to 12"
Price
$1,170.15 Stainless Steel
Open Frame
1
Mobile
6" to 6-5/8"
Price
$1,170.15 Stainless Steel
Open Frame
1
Mobile
5-1/8"
Price
$1,170.15 Stainless Steel
Open Frame
1
Mobile
5-1/4" to 5-7/8"
Price
$1,312.77 Stainless Steel
Open Frame
1
Mobile
9-3/8" to 10-1/4"