1 (800) 555-0666
Delfield F2978CP 78.25" 4 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts

Delfield F2978CP 78.25" 4 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts

F2978CP
Stock Status
Updating. Please wait...
Free Freight
$13,159.00

Contact us for details

$10,474.63

You will earn 13159 Reward Points.

Product Protection
Coverage starting at
FINANCE

Monthly Payment *

Finance Payment Calculator
$225.10
* The above amount may vary depending on the applicant's credit history.
  • 2023 model, meets the newest EPA and DOE codes.

Delfield F2978CP Specifications

Width Range77 to 94 Inches
Top StyleMarine Edge
ConstructionStainless Steel
BrandDelfield
Refrigerant TypeR-290
CertificationsNSF
Capacity8 Full Size Food Pans
Compressor LocationRemote
Number of Drawers4
Sections2
Voltage115 Volts
Width (in)78.25
Height (in)24
Depth (in)31.94
Weight589.00

Additional Information on Delfield F2978CP

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Delfield F2978CP Certifications

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Delfield F2978CP Description

Refrigerated Low-Profile Equipment Stand, 78-1/4"W x 31-47/50"D x 24"H, two-section, (4) drawers (pans not included), stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, 4" casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF

This 78" wide F2978CP Refrigerated low-profile equipment stand with four (4) refrigerated drawers and a capacity of eight (8) 12 x 12 x 4" hotel pans provides the utility and power a large, fast-paced kitchen needs.

This commercial chef base is 78 1/4" wide, 31 47/50 deep, and 24" tall. It has a solid cabinet construction with an 18-gauge stainless steel top specifically designed to safely support the weight and heat from ovens, griddles, broilers, and more! The marine edge that goes around the perimeter keeps the heavy cooking and prep equipment from sliding off and ensures grease and runoff from the surface don’t spill onto the kitchen floor. 

The drawer system plus the drawer fronts and top ends are all built with stainless steel for excellent durability and reduced maintenance! The tracks are removable and are designed with an anti-friction binary roller system for easy and comfortable use. They are also dishwasher-safe for effortless cleaning. The rollers are made of corrosion-resistant Delrin and are self-lubricating for a smoother operation.

This low-profile commercial chef base is insulated with high-density foamed-in-place polyurethane for rigidity while the snap-in door gaskets ensure cold air remains inside the unit. ABS liners on the interior front and sides enhance the insulation while protecting the unit from getting dinged from daily use.

The ozone-safe R290 refrigerant keeps the refrigerated base at 36° to 40°F. A digital thermometer with a protective stainless steel guard is installed on the front nosing where it is most convenient. The mullion coil assemblies are energy-efficient and are engineered to maintain proper airflow and cooling temperatures to keep your products safe and fresh at all times.

For optimal energy efficiency and ease of use, this unit features an electronic temperature control that allows you to find the perfect setting for your products. The refrigerated equipment stand also has an adaptive defrost feature to keep the evaporator coils ice-free for consistent performance! A hot gas system handles the condensate removal for added convenience.

This Delfield low-profile refrigerated equipment is powered by a 1/4 hp compressor installed on the side of the unit together with the rest of the refrigeration parts. This model comes with NSF, cUL, and UL certifications for safe commercial use. It is rated at 4.8 amps and uses 115/60/1 electrical. 8' cord and NEMA 5-15P plug supplied.

Get the best commercial refrigerators & freezers at the best prices only here at CKitchen!

Delfield F2978CP 78.25

Refrigerated Low-Profile Equipment Stand, 78" W, Casters, Two-section, ABS Interior sides, Front non-spill edge, (4) Drawers (pans not included), Stainless steel top & drawer fronts, Side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF


Standard Features:
  • Digital thermometer
  • Mounted on casters
  • 8' cord and plug supplied
  • Standard stainless steel ends
  • Wall-mounted bracket to prevent tipping
  • Exterior drawer fronts are stainless steel
  • Snap-in drawer gaskets for easy removal
  • Environmentally friendly R290 refrigerant
  • Height of surface for setting equipment is 25.50"
  • Top is heavy duty stainless steel, with full perimeter marine edge
  • Interior refrigerated base cabinet section to maintain 36° to 40° meeting NSF7
  • Three year parts and labor warranty and an additional two year compressor parts warranty.
  • When ordering, specify make, model and depth of cooking equipment sitting on the equipment stand
  • Base interior cabinet is cooled with mullion style coated blower coil(s) mounted between each door/drawer section for even air and
  • temperature control 
  • High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit
  • Full Extension Plus Drawer system is a complete drawer system. Drawer system is sized to hold 12" x 20" x 4" deep hotel pans (by
  • others). The drawer system is all stainless steel construction for maximum durability 
Options & Accessories
  • Drawer locks
  • Stainless steel back
  • Plastic laminate end
  • Plastic laminate front
  • Plastic laminate back
  • 6" casters in lieu of 4"
  • Mechanical housing left side
  • Doors in lieu of drawers (except 32")
  • Celsius readout for electronic control
  • 6.12" adjustable full stainless steel legs and bullet feet
  • Single drawer in lieu of two high drawers  (8" deep pans)
  • Remote refrigeration available in R404A (contact factory)
  • 8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions available
Specifications
Exterior top is 18-gauge stainless steel with full perimeter marine edge. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top made of 22-gauge 2BF stainless steel is made integral with the top by injecting 2.00” of high density polyurethane foam between the exterior and interior tops. Refrigerated base interior back and bottom are constructed of a 22-gauge 2BF stainless steel. Exterior bottom and back are made of 22-gauge galvanized steel. Exterior sides aer made of stainless steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00” of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095” thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. Units are supplied with wallmounted bracket and threaded rod to allow installation of the unit against a solid surface. Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Drawers are backed by a 10-year warranty on the track assembly. Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 4” casters are mounted standard. Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control. An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right). 

Options for Delfield F2978CP

Lift gate option
Drawer warranty
Door & drawer options
Compressor location
Top options
Finish
Mounting options
What is included
  • Parts & Labor warranty: 3 year parts & labor warranty, standard
  • Voltages: 115v/60/1-ph, 4.8 amps, NEMA 5-15P, standard

Delfield F2978CP Parts

All Delfield F2978CP Parts

Delfield F2978CP Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Delfield F2978CP to Other Products

Rating
Price
Width (in)
Depth (in)
Height (in)
Sections
Number of Drawers
Construction
Compressor Location
Refrigerant Type
Top Style
Voltage
Certifications
Rating
 
Price
$13,159.00 $10,474.63
78.25
31.94
24
2
4
Stainless Steel
Remote
R-290
Marine Edge
115 Volts
NSF
Rating
 
Price
$14,498.00 $10,491.00
63
34
27
2
4
Stainless Steel
Remote
HFC-404A
Marine Edge
115 Volts
 
Rating
 
Price
$14,550.00 $10,529.00
51
34
27
1
2
Stainless Steel
Side Mounted
HFC-404A
Marine Edge
115 Volts
 
Rating
 
Price
$13,282.50 $10,572.94
80.25
31
26
2
4
 
Side Mounted
R-290
Marine Edge
115 Volts
NSF
Rating
 
Price
$13,282.50 $10,572.94
80.25
31.94
24
2
4
Stainless Steel
Remote
R-290
Marine Edge
115 Volts
NSF
Rating
 
Price
$13,029.50 $10,371.55
75.25
31.94
24
2
4
Stainless Steel
Remote
R-290
Marine Edge
115 Volts
NSF

Items Related to Delfield F2978CP

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Delfield F2978CP 78.25" 4 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
F2978CP 78.25" 4 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
$13,159.00