Description
Duke TEHF-74SS Description Thurmaduke Hot Food Unit, mobile, 74”W X 32”D X 36”H, 16ga stainless steel top, (5) sealed hot food wells, 1” drain line & valve, stainless steel body & undershelf, 5” swivel casters & brakes, 6 ft cord and plug, cULus, EPH Classified
Close Description Options
Options for Duke TEHF-74SS Serving shelves & sneeze guards Fabrication, electrical & special body modifications Move cord set to operator's left +$91.80
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$179.10
Bumpers (3" x 3" rubber corners) (per set) +$152.10
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$72.90
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$180.00
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$558.00
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$171.90
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$271.80
Omission of shelves, open base +$801.00
Special Height Body, per unit
For special width body…per unit +$351.00
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$351.00
Individual brass valves +$639.00
Pedestal-type duplex outlet, mounted, not wired +$393.30
Pedestal-type duplex outlet, mounted, wired to existing power source +$534.60
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$730.80
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$644.40
For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$351.00
6" high stainless steel legs in lieu of standard casters, with stainless steel adjustable foot
For pass-thru construction +$351.00
No Drains, in lieu of standard drains
Locate drains on left +$91.80
Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$934.20
Tray slide - operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$746.10
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$826.20
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$746.10
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$826.20
Kickplates Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$437.40
Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$469.80
Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$437.40
Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$469.80
Cutting board - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,329.30
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,123.20
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,503.00
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$887.40
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,296.90
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$713.70
Cutting board - operator's side Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,329.30
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,123.20
Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,503.00
Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$887.40
Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,296.90
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$713.70
Doors Sliding doors, customer's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$2,219.40
Sliding doors, operator's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$1,143.00
Sliding doors, stainless steel, for customer's side of hot food units with (5) openings (not available on gas models), UL, UL EPH Classified +$2,139.30
Sliding doors, stainless steel, for operator's side of hot food units with (5) openings (not available on gas models), UL, UL EPH Classified +$1,062.90
Voltages 120v/60/1-ph, 3750 watts, 31.3 amps
120v/60/1-ph, 2350 watts, 19.6 amps (special low watt option)
208v/60/1-ph, 4500 watts, 21.6 amps
208v/60/3-ph, 4500 watts, 12.5 amps +$231.30
240v/60/1-ph, 6000 watts, 25.0 amps
240v/60/3-ph, 6000 watts, 14.4 amps +$231.30
Close Options Duke TEHF-74SS
Electric Hot Food Serving Counter
with Controls, 
