Description
Duke TEHF-74SS Description Thurmaduke Hot Food Unit, mobile, 74”W X 32”D X 36”H, 16ga stainless steel top, (5) sealed hot food wells, 1” drain line & valve, stainless steel body & undershelf, 5” swivel casters & brakes, 6 ft cord and plug, cULus, EPH Classified
Options for Duke TEHF-74SS Serving shelves & sneeze guards Fabrication, electrical & special body modifications Move cord set to operator's left +$112.57
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$217.71
Bumpers (3" x 3" rubber corners) (per set) +$185.85
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$89.21
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$89.21
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$89.21
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$218.77
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$678.62
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$209.21
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$331.34
Omission of shelves, open base +$973.85
Special Height Body, per unit
For special width body…per unit +$426.92
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$426.92
Individual brass valves +$780.57
Pedestal-type duplex outlet, mounted, not wired +$478.96
Pedestal-type duplex outlet, mounted, wired to existing power source +$649.94
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$888.89
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$783.76
For special length not listed (maximum one-piece length of 88"): To next longer standard unit price...ADD (for TST models) +$426.92
6" high stainless steel legs in lieu of standard casters, with stainless steel adjustable foot
For pass-thru construction +$426.92
No Drains, in lieu of standard drains
Locate drains on left +$112.57
Recess top to hold 18" x 26" pans, NOTE: not available with model #HTD-BASE-M heat in base option +$1,136.34
Tray slide - operator's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$906.95
Tray Slide, operator's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$1,004.65
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$906.95
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$1,004.65
Kickplates Kick Plate, customer's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$535.25
Kick Plate, customer's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$573.48
Kick Plate, operator's side, powder coated steel, recessed, screw attached, 1/2" above floor for easy rolling +$535.25
Kick Plate, operator's side, stainless steel, recessed, screw attached, 1/2" above floor for easy rolling +$573.48
Cutting board - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,619.55
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,367.86
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,830.89
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,078.99
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,579.19
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$867.65
Cutting board - operator's side Cutting Board, operator's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,619.55
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (Specify any special height) +$1,367.86
Cutting Board, operator's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,830.89
Cutting Board, operator's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,078.99
Cutting Board/Shelf , operator's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,579.19
Cutting Board/Shelf, operator's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$867.65
Doors Sliding doors, customer's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$2,698.54
Sliding doors, operator's side, with lock and keys, stainless steel, and recessed stainless steel pull (not available on gas models) +$1,390.16
Sliding doors, stainless steel, for customer's side of hot food units with (5) openings (not available on gas models), UL, UL EPH Classified +$2,600.84
Sliding doors, stainless steel, for operator's side of hot food units with (5) openings (not available on gas models), UL, UL EPH Classified +$1,292.45
Voltages 120v/60/1-ph, 3750 watts, 31.3 amps
120v/60/1-ph, 2350 watts, 19.6 amps (special low watt option)
208v/60/1-ph, 4500 watts, 21.6 amps
208v/60/3-ph, 4500 watts, 12.5 amps +$281.43
240v/60/1-ph, 6000 watts, 25.0 amps
240v/60/3-ph, 6000 watts, 14.4 amps +$281.43
Close Description Duke DukeTEHF-74SSElectric Hot Food Serving Counterwith Controls, 
No Money Down, 0% Interest For 90 days Up to $50k | Buy Now, Pay Later | Instant credit decision Subject to credit approval. Limited time offer. Learn More → 
