Description
Duke E-5-DLPG Description Thurmaduke™ Steamtable Unit, electric, 74"W x 34"D x 36"H, 16ga stainless steel top, (5) stainless steel sealed wells, drains, copper manifolds, (1) brass valve, thermostat controls, integral stainless steel cutting board, dish shelf, 20ga paint grip steel body & undershelf, 6"H stainless steel legs with adjustable feet, cULus, UL EPH Classified NOTE: Electric values & plug configurations change for 3 phase or when adding electric options - Contact Factory for more info)
Options for Duke E-5-DLPG Serving shelves & sneeze guards Cutting board/shelf - customer's side Cutting Board, customer's side, 7"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,329.30
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (specify any special height) +$713.70
Cutting Board/Shelf, customer's side, 7"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top (specify any special height) +$1,123.20
Cutting Board, customer's side, 10"D, 1/2" white poly, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$1,503.00
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) fixed brackets, shelf mounted flush to counter top (No hinged brackets) +$887.40
Cutting Board/Shelf, customer's side, 10"D, 18ga stainless steel shelf, (3) hinged brackets, shelf mounted flush to counter top +$1,296.90
Fabrication, electrical & special body modifications Move cord set to operator's left +$91.80
Push bar, stainless steel handle & brackets, mounted on operator's right end (specify if left end) +$179.10
Bumpers (3" x 3" rubber corners) (per set) +$152.10
Round cutout with raw edge, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Round cutout with grommet, in counter top, body panel or a shelf (specify cutout diameter & location) +$72.90
Rectangular cutout with raw edge, must be 12" or less, in counter top, body panel or a shelf (specify cutout size & location) +$72.90
Rectangular cutout with reinforced edges, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$180.00
Rectangular cutout with reinforced turn down edges & corners welded closed, in counter top, body panel or a shelf, counter top max. right to left is 4" less than unit length (specify cutout size & location) +$558.00
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, not wired +$171.90
Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle & stainless steel cover, wired to existing power source +$271.80
Omission of shelves, open base +$801.00
Special height legs (per leg) (shorter height voids NSF approval) +$70.20
Special Height Body, per unit
For special width body…per unit +$351.00
Body latches for holding portable units together, pair +$136.80
Filler panel for special length, mounted on end, enclosed both sides & end, includes longer counter top, longer tray slide if needed, no other equipment in filler +$351.00
Individual brass valves +$639.00
Pedestal-type duplex outlet, mounted, not wired +$393.30
Pedestal-type duplex outlet, mounted, wired to existing power source +$534.60
Tier of stainless steel angle slides in base - to hold (4) trays, pans etc. +$730.80
Modified base - to accept roll warmer (warmer by other manufacturers) not wired...per roll warmer +$644.40
For pass-thru construction +$351.00
No Drains, in lieu of standard drains
Locate drains on left +$91.80
Exposed element hot food wells with stainless spillage pan, in lieu of standard wells in a (5) well unit +$729.00
Tray slide - customer's side Tray Slide on fixed brackets, (3) bar tubular, 1" dia. stainless, end caps, mounted 34"H (specify any other height), NSF +$746.10
Tray Slide, customer's side, (3) tubular Ø 1" bars, stainless steel, on hinged brackets, end caps, mounted 34"H (specify any other height) +$826.20
Doors - customer's side Sliding doors, customer's side, with lock and keys, paint grip steel to match body, and recessed stainless steel pull (not available on gas models) +$2,075.40
Sliding doors, paint grip, for customer's side of hot food units with (5) openings (not available on gas models), UL, UL EPH Classified +$1,995.30
Voltage options 120v/60/1-ph, 3750 watts, 31.3 amps
208v/60/1-ph, 3750 watts, 18.0 amps
208v/60/3-ph, 3750 watts, 10.4 amps +$231.30
240v/60/1-ph, 3750 watts, 15.6 amps
240v/60/3-ph, 3750 watts, 9.0 amps +$231.30
Close Description Certifications
Duke E-5-DLPG Certifications cULus UL (Underwriters Laboratories) approval for the US and Canada
UL UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified This product complies with UL EPH standards and meets ANSI/NSF requirements.
Close Certifications Duke Duke
E-5-DLPG
Electric Hot Food Serving Counter
with Controls,