FWE / Food Warming Equipment Co., Inc. P-144-2 2 Door Heated Banquet Cabinet Holds up to 120-144 Plates, 120 Volts

P-Series Banquet Cart, (2) doors, capacity (120-144) covered plates, 11" max. diameter, humi-temp heat system, bar type push handles, (3) shelves, 20 gauge stainless steel exterior with 22 gauge stainless steel interior construction, wraparound bumper, 6" casters (2) rigid & (4) swivel with brakes, NSF, UL EPH Classified, cULus

For large-scale catering operations that need to move plated meals far from where it’s cooked the P-144-2 2 Door Heated Banquet Cabinet from FWE is an incredible asset. Inside this cabinet three heavy-duty shelves can hold up to 144 11” covered plates stacked five high.

The holding temperature in the cabinet is easy to monitor with an analog thermometer that does not require power for operation. Setting the temperature with the manual controls allow for adjustments from 90°F to 190°F in ten-degree increments. Heating is provided by the Humi-Temp system which uses a fan-cooled blower motor to circulate air warmed by the Incoloy nickel-chromium heating element and kept moist by a baffled humidifier pan.

The interior is easy to access with a full grip latch that’s edge-mounted to stay out of the way. The latch makes sure the door is always closed properly while a cabinet mounted door gasket maintains an airtight seal. To keep heat from escaping the door is insulated and features a cabinet mounted door gasket.

The durable 20 gauge stainless steel exterior is made to stand up to serious commercial use and features a polished finish for easy maintenance. The interior is made from 22 gauge stainless steel with coved corners to make cleaning easy. Keeping the interior nice and warm without using to much power is easy thanks to the UG-26 high-density fiberglass insulation in the top, sides, bottom, and back of the cabinet.

For portability, this cabinet features 6” maintenance-free polyurethane casters. To prevent the cabinet or venue from being damaged when being moved about a 1-½” wide aluminum channel that extends past the doors features non-marking snap-n vinyl cushions.

With UL listing, UL EPH classification, as well as IPX4 and CE certification, you can be sure this holding cabinet is built to high standards and meets all applicable safety and sanitation requirements.

• Push/pull handles - allows easy maneuvering 
• Heavy-duty “no sag” shelves are removable to facilitate thorough cleaning
• P-2 series’ models hold up to 11″ plates. P-2-XL models are available for up to 12.375″ plates 
• Eye level controls are up-front, recessed protected, easy to read and set, and include a full-range °F/°C thermostat for easy operation. Thermometer continuously reads cabinet temperature – even without power source! 
• FWE’s patented Humi-Temp heat and humidity system eliminates hot and cold spots by gently circulating hot, moist air throughout the interior of the cabinet. Humidity can be added to condition circulated heat, keeping food fresh and hot for hours 
• FWE banquet cabinets are constructed for high performance in restaurant and resort banquet operations. Engineered for transport applications - standard, stainless steel, tubular base frame is engineered to absorb vibration and shock during transport 

• ELECTRIC
  • Electronic controls
  • Upgraded element
  • Solar Digital Thermometer
  • 220 volt, 50/60 Hz, single phase
• DOORS
  • Dutch doors
  • Paddle latch
  • Key locking door latch
  • Padlocking transport latch
• CASTERS
  • Floorlock
  • Larger casters
• EXTRAS
  • Dry erase board
  • Menu card holder
  • Cord winder bracket
  • Ergo drop down handle
  • Plate carriers: CP or UP
  • Extra shelves - factory installed