Hatco S-45-208-3-QS (QUICK SHIP MODEL) Imperial 16 Gallon Electric Booster Heater
MPN#: S-45-208-3-QS
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Hatco S-45-208-3-QS Accessories
Description
Hatco S-45-208-3-QS Description
(QUICK SHIP MODEL) Imperial Booster Heater, electric, 16 gallon storage capacity, stainless steel front, custom fitting & Castone® lined tank, 6" legs, 45.0kW, 208v/60/3-ph, NSF, cULus, Made in USA(QUICK SHIP MODEL) Imperial Booster Heater, Electric, 16-gallon storage capacity, 45-KW, stainless steel front, custom fitting & Castone tank, 6" legs, 208v/60/3-ph, NSF, cUL, ULStandard Features:
The Hatco Imperial Electric Booster Water Heater combines quality construction and rugged dependability to provide up to 573 GPH (2169 LPH) of sanitizing rinse water. Dishes and flatware air-dry instantly to save time, space and money. Storage capacity is 16 gallons (60 liters).Thermostats can be lowered to a 140° F (60° C) setting for low-temp dishmachines, and service area is accessible from the front to permit easy installation, even next to other equipment.
- All models include a Castone® lined tank with a 10-year limited warranty
- Each booster has a built-in heat trap and fiberglass insulation to minimize heat loss
- A stainless steel front panel and powder- coated silver-gray hammertone body is standard on all Imperial models
- Hatco Electric Booster Heaters are factory pre-plumbed and pre-wired with calibrated immersion thermostats and high-temperature limit switch
- Features include a temperature/pressure relief valve, a pressure reducing valve, two temperature/pressure gauges, a high-temperature limit control, pilot indicator light, On/Off switch and a low-water cut-off to prevent element burnout due to a low water condition
Options: (Available at time of purchase only)
- Stainless Seel Body and Base
- Security Package (Torx® screws and control cover)
Accessories:
- Back Pressure Relief Valve
- Shock Absorber (reduces water hammer)
- Additional Brass Pressure Reducing Valve with Bypass
- Additional Stainless Steel Floor Mounting Leg Assembly
- Blended Phosphate Injection System (not for potable water)
- Additional Stainless Steel Adjustable Legs 6" - 7" (152 - 178 mm)
Q & A
Certifications
Hatco S-45-208-3-QS Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Hatco S-45-208-3-QS Specifications
| Made in | USA |
|---|---|
| Certifications | NSF |
Additional Information on Hatco S-45-208-3-QS
Free Freight?
Quick Ship
$5,261.30
Product Protection
Starting at
