Lakeside Manufacturing Manufacturing 8535 Roll-In Cooler Rack

Made in USA
Lakeside Manufacturing Manufacturing 8535 Roll-In Cooler Rack
Free Freight
Retail Price $1,222
Price $1,132

You will earn 1,222 1,132 Reward Points. Earn 1 reward point for every 1 dollar spent.
Read more.

FINANCEFOR $28.39/mo.

  • There is a $375 min. order requirement from this manufacturer

BrandLakeside Manufacturing
Made inUSA
TypeRoll-In Refrigerator Racks
Loading StyleEnd Load
Rack TypeBun Pan
Sheet Pan Capacity13 Pans
Shelf Spacing4 1/2 Inches
Width (in)24.50
Height (in)70.00
Depth (in)26.00
Length (in)26
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Roll-In Cooler Rack, 70"H, open sides, capacity (13) pair universal stepped angle ledge, 4-1/2" spacing, welded aluminum construction, fits high type coolers, 5" swivel casters, NSF
Standard Features:
Ideal transport and storage for a wide variety of pans, trays and containers.  
  • NSF listed.
  • Durable, lightweight welded aluminum construction.
  • Welded corner gussets maintain square unit integrity.
  • Ledges are 6-1/4” wide and are  welded on 4½” centers.
  • Accommodates a variety of pans, trays, or storage boxes.
  • Rugged square tubing frame provides durability and long life.
  • Casters are 5” swivel plate type with  No-Mark® polyurethane tread.
  • All seams are fully welded and sealed to provide a smooth, easy-to-clean surface. No cracks or crevices to trap dirt!
Optional Accessories:
  • Pan stop
  • Solid sheet base
  • Perimeter bumper 
  • Break casters (set of 2)
  • Vertical leg bumpers (set of 4)
  • Bottom corner bumpers (set of 4)
Shall be constructed of hi-tensile, corrosion resistant, rust proof, primary extruded aluminum, Type 6063-T5 alloy. All seams shall be heli-arc welded with all welded and sealed (no rivets). Vertical uprights shall be extruded tube, 1¼” x 1½” x .070 wall. Top and bottom frames shall be extruded tube, 1¼” x 1½” x .070 wall, welded and shall be welded to uprights. Bottom frame has caster plates (pre-tapped), 3/8” thick, welded to frame so that casters are inset. Gussets of 1½” x 1½” x 5/8” thick angle are welded to the inside angles (bottom side) where horizontal cross bracing meets vertical uprights with a 4-½” continuous weld. Two each tie rods of 1” x 1” x .070 wall extruded tube shall be welded to uprights. Extruded angle ledges are a stepped type, 2” x 6¼” x .100 thick, with all corners chamfered and deburred. Ledges are welded to uprights on 4-½” centers. Casters shall be all swivel with 5” diameter, non-markeing polyurethane tire, 1-¼” wide, with an operating temperature range of -25°F to +190°F. Wheel bearings shall be sealed and permanently lubricated.
Bumpers, pan stop & solid base
Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Lakeside Manufacturing Manufacturing 8535 Roll-In Cooler Rack
Manufacturing 8535 Roll-In Cooler Rack