Beverage Air DD50HC-1-C-B 1 Tap 1/2 Barrel Draft Beer Cooler - Black, 2 Kegs Capacity, 115 Volts
Calculate
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD50HC-1-C-B Specifications
| Number of Taps | 1 Tap |
|---|---|
| Number of Kegs | 2 Kegs |
| Amps | 7.4 Amps |
| Installation Type | Built-In |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Type | Beer Dispensers |
| Certifications | cULus |
| Number of Doors | 2 |
| Exterior Finish | Black |
| Door Type | Solid |
| Sections | 2 |
| Style | 1/2 Barrel |
| Voltage | 115 Volts |
| Width (in) | 50.5 |
| Height (in) | 52.5 |
| Depth (in) | 29 |
| Weight | 330.00 |
Additional Information on Beverage Air DD50HC-1-C-B
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD50HC-1-C-B Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD50HC-1-C-B Description
Draft Beer Cooler, Club Top, 50-1/2"W, 29"D, 17.86 cu. ft., (2) doors, (1) slide back lid with (1) shelf, (2) keg capacity, door locks, (1) dual faucet tower, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, MADE IN USAThe Beverage Air DD50HC-1-C-B Draft Beer Cooler is a fully-featured draft beer serving platform complete with a club top for easy service. This dispenser has 17.86 cu. ft. to store two ½ kegs.
The unit features self-closing doors and magnetic door gaskets to prevent excessive power draw while keeping kegs as cold as possible. Door locks come standard for security. The interior features galvanized steel construction for the walls and ceiling and the floor and door sill are made from durable stainless steel. The heavy-duty stainless steel top provides a secure platform to serve beer. A built-in drip tray catches any spills and routes it down to a drain tube to connect to a floor drain. A 3” insulated dispensing tower made from stainless steel keeps beer cool and prevents foaming.
This unit features a 3-in-1 draft solution allowing a single tap to serve different beverages like beer, coffee, and wine through silver-lined tubing. Silver is inherently ant-microbial making it effective against the top 4 beverage spoiling bacteria. The club top has an easy glide stainless steel lid providing additional storage for cans, bottles or glasses. The club top has a single basket and an epoxy-coated shelf.
The self-contained refrigeration system can be ordered on either the left or right, it uses a ¼ HP compressor that produces 1702 BTU/hr of cooling. Items inside are kept between 36ºF and 38ºF by the fully electronic controls. The refrigeration system also features an epoxy-coated evaporator coil to provide reliable refrigeration with minimal maintenance. An automatic non-electric defrost system keeps the interior from frosting over while keeping downtime to a minimum. The refrigeration system utilizes R290 refrigerant which is an eco-friendly hydrocarbon that has a markedly reduced impact on the environment for safe, sustainable refrigeration.
An eight-foot power cable comes prewired from the factory with a NEMA 5-15P plug set for use with standard 115v/60/1-ph power at 2.5 amps.
Standard Features:
- Cabinet Construction
- Full electronic control
- Field reversible doors
- Self-closing doors with locks
- Magnetic gaskets provide positive door seal
- 3” Insulated dispensing tower(s) with dual draft arm
- Top is made from heavy-duty stainless steel including drip tray
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1-5 Tap tower
- Low profile casters
- 2,3 & 4 way manifolds
- Foot pedal door opener
- Club top models available
- No draft/hole cover option
- Stainless steel interior available
- 3”-6” casters or 6” legs with adjustable plate
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD50HC-1-C-B Accessories
Beverage Air DD50HC-1-C-B Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Beverage Air DD50HC-1-C-B to Other Products
Items Related to Beverage Air DD50HC-1-C-B
