Beverage Air DD58HC-1-B 3 Taps 1/2 Barrel Draft Beer Cooler - Black, 3 Kegs Capacity, 115 Volts

Beverage Air DD58HC-1-B Description

Draft Beer Cooler, 59"W, 29"D, 21.86 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single & (1) dual faucet towers, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The DD58HC-1-B Draft Beer Cooler from Beverage Air is a dual tower unit with a total of three taps to keep the ice-cold beer flowing in your establishment. The interior of this dispenser has 21.86 cu. ft. of refrigerated space for three ½ kegs.

This unit features self-closing doors that come standard with locks for security. The interior walls and ceiling are made from galvanized steel while the floor and door sill are reinforced with durable stainless steel to handle kegs. The heavy-duty stainless steel top provides a secure platform to serve beer. A built-in drip tray catches any spills and routes it down to a drain tube to connect to a floor drain. A 3” insulated dispensing tower made from stainless steel keeps beer cool and prevents foaming.

The side-mounted refrigeration unit houses a ¼ HP compressor that produces 1702 BTU/hr of cooling. Depending on your needs, the compressor can be installed on either the right or left side. The interior temperature is kept between 36ºF and 38ºF by the fully electronic controls while an epoxy-coated evaporator makes sure the refrigeration system requires as little maintenance as possible while providing refrigeration you can rely on. This unit defrosts automatically with a non-electric system to reduce downtime while maintaining peak efficiency. To meet all environmental regulations R290 hydrocarbon refrigerant is used.

Power is supplied by a factory-installed 8-foot power cable with a NEMA 5-15P plug set for use with standard 115v/60/1-ph at 2.5 amps.

Draft Beer Cooler, 59" W, 28-3/16" D, (2) doors, 23.8 cu. ft., (3) keg capacity, door locks, (1) single and (1) dual faucet towers, black exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USA

• Cabinet Construction
  • Full electronic control
  • Field reversible doors
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top and drip tray are heavy-duty stainless steel
  • Compressor available on left or right, specify at time of unit order
  • Two (2) draft arms, one (1) with single faucet and (1) with dual faucets
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor and doorsills are heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1- 5 Tap tower
  • 2,3 & 4 way manifolds
  • Foot pedal door opener
  • Club top models available
  • No draft/hole cover options
  • Stainless steel external & internal available
  • 3”-6” casters or 6” legs with adjustable plate