Beverage Air DD78HC-1-S-12T 4 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 4 Kegs Capacity, 115 Volts

Beverage Air DD78HC-1-S-12T Description

Draft Beer Cooler, 79"W, 28-3/16"D, 33.59 cu. ft., (3) doors, (4) keg capacity, door locks, (12) tap tower, stainless steel exterior & top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Does your bar need a large draft beer station with a dozen taps? The Beverage Air DD78HC-1-S-12T Draft Beer Cooler has you covered with its dependable refrigeration and simple design. This dispenser has 33.59 cu. ft. of interior space for four ½ kegs.

This unit features self-closing doors that come standard with locks for security. The interior walls and ceiling are made from galvanized steel while the floor and door sill are reinforced with durable stainless steel to handle kegs. The top of the unit is made from heavy-duty stainless steel and features a drip tray to catch any spills. The drip tray drains through a drain tube at the bottom of the unit to empty into a floor drain. To keep the beer from foaming the 3” stainless steel dispensing tower is insulated. For added versatility, this unit features a 3-in-1 draft solution. With the use of silver-lined tubing,  different beverages like wine, coffee, and beer can be served from a single tap. Silver is naturally anti-microbial and is 100% effective against the top 4 bacteria that spoil beverages.

Cooling is provided by a side-mounted refrigeration system utilizing a ⅓ HP compressor that provides 2392 BTU/hr of cooling. To best fit your establishment the refrigeration system can be ordered on either side. The epoxy-coated evaporator in this unit makes sure efficient cooling is provided in a reliable manner for many years with minimal service. Fully electric controls will keep the temperature between 36ºF and 38ºF while consuming as little power as possible. Defrosting is accomplished automatically with a non-electric system to reduce downtime while keeping the interior free of frost. The refrigerant used is R290, an environmentally-friendly hydrocarbon that meets all environmental regulations.

Power is supplied by a factory-installed 8-foot power cable with a NEMA 5-15P plug set for use with standard 115v/60/1-ph at 5.5 amps.

Draft Beer Cooler, 79" W, 28-3/16" D, 34.2 cu. ft., (3) doors, (4) keg capacity, door locks, (12) tap tower, stainless steel exterior & top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

• Cabinet Construction
  • Full electronic control
  • Field reversible doors
  • Two (2) dual tap towers
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top is made from heavy-duty stainless steel including drip tray
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1- 5 Tap tower
  • Low profile casters
  • Special 6/pan option
  • 2,3 & 4 way manifolds
  • Foot pedal door opener
  • No draft/hole cover option
  • Epoxy coated wire shelves
  • Stainless steel interior available
  • 3”-6” casters or 6” legs with adjustable plate