Beverage Air DD94HC-1-S-12T 12 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 5 Kegs Capacity
Photo may not represent the actual product.
Always refer to the description and spec sheet (if available).
Beverage Air DD94HC-S-12T Accessories
Description
Beverage Air DD94HC-S-12T Description
If you want a large beer dispenser with a dozen taps for your business but can’t install a remote system, the Beverage Air DD94HC-1-S-12T Draft Beer Cooler is your best bet. This unit provides 37.82 cu. ft. of refrigerated space for up to five ½ kegs.
The self-closing doors and magnetic door gaskets on this unit prevent excessive power draw while keeping kegs as cold as possible. Door locks come standard for security. The interior features galvanized steel construction for the walls and ceiling and the floor and door sill are made from durable stainless steel. The 12 tap dispensing tower is3” in diameter and made from stainless steel. It’s nsulated to prevent beer from foaming and makes sure it's always nice and frosty. The top is made from durable stainless steel and comes with a built-in drip tray. that connects to a floor drain through internal routing. Beverage Air’s 3-in-1 draft solution makes it possible to serve different beverages with a single tap. This is made possible with silver-lined tubing. Silver is a natural anti-microbial element and is 100% effective against the top 4 beverage spoiling bacteria.
Cooling is provided by a side-mounted refrigeration system utilizing a ⅓ HP compressor that provides ⅓ BTU/hr of cooling. To best fit your establishment the refrigeration system can be ordered on either side. The internal temperature is kept from 36ºF to 38ºF with fully electronic controls. The refrigeration system features an epoxy-coated evaporator for durability and reliability. To meet all environmental regulations this unit uses R290 hydrocarbon refrigerant that minimizes negative effects on the atmosphere. An automatic non-electric defrost system provides convenience and minimizes downtime.
An eight-foot power cord with a NEMA 5-15P plug set is wired at the factory to connect this unit to a standard outlet providing 115v/60/1-ph power at 5.5 amps.
Standard Features:
- Cabinet Construction
- Twelve tap tower
- Full electronic control
- Field reversible doors
- Self-closing doors with locks
- 4” Insulated dispensing tower
- Magnetic gaskets provide positive door seal
- Top and drip tray are heavy-duty stainless steel
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- Low profile casters
- 2,3 & 4 way manifolds
- Foot pedal door opener
- No draft/hole cover option
- Epoxy coated wire shelves
- Stainless steel interior available
- 3”-6” casters or 6” legs with adjustable plate
Q & A
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Certifications
Beverage Air DD94HC-S-12T Certifications
5-15P
Two-pole with ground pin plug
cULus
UL (Underwriters Laboratories) approval for the US and Canada
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD94HC-S-12T Specifications
| Number of Taps | 12 Taps |
|---|---|
| Number of Kegs | 5 Kegs |
| Amps | 5.5 Amps |
| Installation Type | Built-In |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Certifications | 5-15P, cULus, cULus, UL, UL, UL EPH, UL EPH, UL EPH Classified, UL EPH Classified, UL-Sanitation |
| Type | Beer Dispensers, Beer Dispensers |
| Number of Doors | 3 |
| Exterior Finish | Stainless Steel, Stainless Steel |
| Door Type | Solid |
| Sections | 3 |
| Style | 1/2 Barrel |
| Voltage | 115 Volts |
| Width (in) | 940 |
| Height (in) | 53.13 |
| Depth (in) | 30.38 |
| Weight | 940 |
Additional Information on Beverage Air DD94HC-S-12T
- 2026 model, meets the newest EPA and DOE codes.
Compare Beverage Air DD94HC-S-12T to Other Products
Items Related to Beverage Air DD94HC-S-12T
