Cleveland Range KEL40TSH Short Series" Steam Jacketed Kettle
SKU#: KEL40TSH
Free Freight?
Quick Ship
$30,389.15
Contact us for details
Calculate
Product Protection
Starting at
- Free Start-Up Program: Includes a performance check-out by Factory Authorized Servicer after installation and equipment demonstration by factory trained sales rep.
- Please see specification sheet for installation clearance requirements
Cleveland Range KEL40TSH Specifications
| Installation Type | Floor Model |
|---|---|
| Kettle Jacket | Full |
| Type | Single Kettle |
| Brand | Cleveland Range |
| Kettle Material | Stainless Steel |
| Power Type | Electric |
| Base | Tri-Leg |
| Capacity | 40 Gallon |
| Heat | Electric |
| Style | Tilting |
| Width (in) | 45 |
| Depth (in) | 41.13 |
| Weight | 360.00 |
Additional Information on Cleveland Range KEL40TSH
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Cleveland Range KEL40TSH Description
Short Series™ Steam Jacketed Kettle, electric, manual tilting, 40-gallon capacity, full steam jacket design, 316 stainless steel interior, 35" rim height, solid state water level control, open tri-leg base, 304 stainless steel construction, flanged feet, 50 psi rating, IPX6Short Series™ Steam Jacketed Kettle, electric, tilting, 40-gallon capacity, full steam jacket design, 35" rim height, open tri-leg base, stainless steel exterior finish, standard with flanged feet, 50 psi ratingStandard Features:
- 50 psi safety valve
- Water resistant controls, splash-proof construction
- Splash proof element cover with a double gasket seal
- Typical approvals include UL., CSA, CE, NSF and ASME
- Large pouring lip for high capacity and chunky products
- 50 psi steam jacket rating for higher cooking temperatures
- Standard voltage is 208-240 volts, 60 Hz, 3 – phase, 3 wire
- Self-contained, easily installed - needs only an electrical hook-up
- Solid state water level control (no sight glass gauge to break or leak)
- 1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
- Steam jacket filled with treated water, venting and/or refilling is not required
- Welded-in heating elements, (holds vacuum better, won't leak or loose water)
- Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
- Tilt mechanism of roller bearings and case hardened self-locking worm and segment gear
- Easily cleaned: kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
- Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone"
- Accurate, consistent solid state temperature controls (mechanical thermostat not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C).
- Control panel includes:
- Power ON/OFF switch
- LED indicator for low water
- LED indicator for heat cycle
- Adjustable temperature control dial
- Pan Carrier (PCK)
- Lift Off Cover (CL)
- Flow Diverter (FD)
- Food Strainer (FS)
- Drain Strainer (DS)
- Kettle Markings (KM)
- Basket Strainer (BS)
- Measuring Strip (MS)
- Correctional Packages
- Steam Control Kit (SCK1)
- Kettle Accessory Kit (KAK)
- Spring Assist Cover (CHS)
- 240 Volt, Single Phase Option
- Heat Deflector Shield (HS001)
- 316 Stainless Steel Liner (316)
- Tri-Basket Strainer Support Systems (TBS)
- 2" Tangent Draw-Off (TD2) (available in 40 gallon only)
- Hot and cold water faucet (DPK), or cold water (SPK). Requires faucet bracket (FBKT)
Cleveland Range KEL40TSH Accessories
Cleveland Range KEL40TSH Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Cleveland Range KEL40TSH
Commercial Steam Kettles 492 products
