Delfield CAB2-913 Dispenser

CAB2-913
Delfield CAB2-913 Dispenser
Free Freight
Price $1,959

for more information

Price $1,424

You will earn 1,424 Reward Points. Earn 1 reward point for every 1 dollar spent.
Read more.

FINANCEFOR $35.71/mo.



Specifications
BrandDelfield
CertificationsNSF
Width (in)32.25
Height (in)36
Depth (in)17
Weight135
Additional Information

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Description

Standard Features:
  • Non-marring gray corner bumpers
  • Spring supports to be 14-gauge S/S
  • Field adjustable self-leveling mechanism
  • (4) 4.00” locking polyolefin swivel casters
  • One year parts and 90 day labor warranty
  • Cabinet top to be 16-gauge stainless steel
  • High impact plastic guide posts mounted to flange
  • Outer body and corners to be 20-gauge stainless steel
  • Dispenser flange, channels and bottom to be integrally welded
  • Carrier head made of welded rods with a removable 18-gauge top plate
  • Dispenser top flange, vertical side channels and bottom brace are stainless steel
  • Heated, QT & ET Features
    • 9’ cord and plug
    • Air intake shall be filtered
    • On/off switch on each dispense
    • ET maintains 120-140°F (49-60°C)
    • QT maintains 150-170°F (66-77°C)
    • Adjustable thermostat per dispenser
    • QT- stainless steel cover per dispenser
    • 22-gauge stainless steel jacket around dispenser
    • Convection heating module and fan motor per dispenser
Options & Accessories
  • Wrap-around bumpers
  • Four 4” or 5” polyurethane casters
  • Hold-down rod for dispenser tubes
  • Flange-mount feet in lieu of casters
  • Shorten dispenser tubes to special length
  • 220 volt, 50/60 cycle, single phase electrical connections
  • Stainless steel tube cover (-500 through -725 models only)
  • Stainless steel dome cover (-813 through -1450 models only)
  • 12” diameter S/S dish dispenser tray (-1200 and -1450 models only)
  • Rods for oval dishes and diameter adjustment (-813 through -1450 only)
  • Note: Inclusion of these options will alter the electrical specifications of unit
Specifications
Cabinet top shall be 16-gauge stainless steel with all corners welded and polished and reinforced with heavy-gauge channels. Cabinet exterior panels and corner support angles shall be 20-gauge stainless steel. Unit shall have four 4.00" (10cm) diameter polyolefin swivel casters (all locking), and non-marking gray bumpers at each corner. Dispenser tube shall have 3 vertical side channels and a bottom brace of 22-gauge stainless steel. Top supporting flange shall be 18-gauge stainless steel. Flange, channels and bottom brace shall be integrally welded together. Flange shall have 3 guide posts molded from high impact plastic. Self-leveling mechanisms shall be field adjustable by adding or removing stainless steel extension springs on perimeter of vertical side channels. The dish carrier head shall be stainless steel welded rods with a removable 18-gauge stainless steel top plate. 
Options
Casters or flanged feet
Exterior panels
Shorten dispenser
Wrap around bumpers
Parts & labor warranty
Extended warranty
Options & accessories
NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Customer Reviews

There are no reviews yet for this product.

Questions and Answers
Delfield CAB2-913 Dispenser
CAB2-913 Dispenser
$1,959 $1,424
Contact Us
1 (800) 555-0666